2ED100E12-F2_EVAL Infineon Technologies, 2ED100E12-F2_EVAL Datasheet - Page 5

• Manufacturer Part Number: 2ED100E12-F2_EVAL
• Description: Power Management IC Development Tools Eval Driver Board EconoDual
• Manufacturer: Infineon Technologies

1
The Evaluation Driver Board 2ED100E12-F2 for EconoDUAL™3 modules as can be seen in Figure 1 and
the Evaluation Driver Board 6ED100E12-F2 for EconoPACK™+ modules, shown in Figure 2, were
developed to support customers during their first steps designing applications with these modules. The basic
version of each board is available from Infineon in small quantities. The properties of these parts are
described in the chapter 2.2 of this document whereas the remaining paragraphs provide information
intended to enable the customer to copy, modify and qualify the design for production, according to his
specific requirements.
The design of the 2ED100E12-F2 and the 6ED100E12-F2 was performed with respect to the environmental
conditions described as design target in this document. The requirements for leadfree reflow soldering have
been considered when components were selected. The design was tested as described in this
documentation but not qualified regarding manufacturing and operation in the whole operating ambient
temperature range or lifetime.
The boards provided by Infineon are subjected to functional testing only.
Due to their purpose Evaluation Boards are not subjected to the same procedures regarding Returned
Material Analysis (RMA), Process Change Notification (PCN) and Product Discontinuation (PD) as regular
products.
See Legal Disclaimer and Warnings for further restrictions on Infineons warranty and liability.
SAP number for EconoDUAL™3 Evaluation Driver Board: 31165
Figure 1
Application Note
Introduction
The 2ED100E12-F2 Evaluation Driver Board mounted on the top of the EconoDUAL™3
module
Driver board for EconoDUAL™3 and EconoPACK™+
5
V1.2, 2009-08
AN2008-02
Introduction