2ED100E12-F_EVAL Infineon Technologies, 2ED100E12-F_EVAL Datasheet - Page 5

• Manufacturer Part Number: 2ED100E12-F_EVAL
• Description: Power Management IC Development Tools Eval Board EconoDual
• Manufacturer: Infineon Technologies

1
The Evaluation Driver Board 2ED100E12-F was developed to support customers during their first steps
designing applications with EconoDUAL
Infineon in small quantities. The properties of this part are described in the datasheet chapter of this
document whereas the remaining paragraphs provide information intended to enable the customer to copy,
modify and qualify the design for production, according to his specific requirements.
The design of the 2ED100E12-F was performed with respect of the environmental conditions described as
design target in the datasheet part. Also the requirements for leadfree reflow soldering have been
considered when components were selected. The design was tested as described in this documentation but
not qualified regarding manufacturing, operation in the whole operating ambient temperature range or
lifetime.
The boards provided by Infineon are subjected to functional testing only.
Due to their purpose Evaluation Boards are not subjected to the same procedures regarding Returned
Material Analysis (RMA), Process Change Notification (PCN) and Product Withdraw (PWD) as regular
products.
See Legal Disclaimer and Warnings for further restrictions on Infineons warranty and liability.
Due to the Evaluation Driver Board’s mounting position (Figure 1) and the internal module construction the
2ED100E12-F can ensure functional isolation only.
Figure 1
Application Note
SAP:28898
Introduction
The 2ED100E12-F Evaluation Driver Board mounted on the top of the EconoDUAL
module
TM
-modules. The basic version of this board is available from
5
Driver for EconoDUAL
V1.0, 2006-05
AN2006-04
Introduction
TM
TM