EVM-915-DTS-BZS Linx Technologies, EVM-915-DTS-BZS Datasheet - Page 17

• Manufacturer Part Number: EVM-915-DTS-BZS
• Description: RF Development Tools 915 MHz Wireless Module DTS Brazil
• Manufacturer: Linx Technologies
• Type: Wi-Fir

Specifications of EVM-915-DTS-BZS

• Rohs: yes
• Product: Evaluation Modules
• Tool Is For Evaluation Of: Wi.232DTSB-R
• Frequency: 915 MHz
• Operating Supply Voltage: 3 V to 3.6 V
• Interface Type: UART
• Factory Pack Quantity: 1

By default, the module will send an acknowledgement character (0x06) to
the UART TxD pin to let the calling application know that it is awake and
ready. To control this feature, see “ACK on Wake” in this section.
ACK on Wake
32: ACK on Wake
When the module’s RF components are ready to transmit/receive, the
module can send an ACK character (0x06) to the host through the UART
TxD pin. This notification let the host processor know when the module
is ready to commence RF communications. Set this register to 0x00 to
prevent the sending of this character, or 0x01 to allow the character to be
sent. The default value for this register is 0x01.
MAC Address
Figure 33: MAC Address
These registers make a unique 48-bit MAC address. These values are
factory preset and cannot be altered. These address bytes are not used
by the module. They are provided for customer applications as a unique
address.
Preliminary Draft
–
28
–
Release Number
Figure 34: Release Number
This register indicates the firmware release number for the module.
Figure 35 translates DTS Series release numbers to firmware versions.
Figure 35: Release Number to Version Number
Release Number to Version Number
Release Number
18
0
1
2
3
4
5
8
Module Type
DTS-FCC
DTS-FCC
DTSB
DTS
EUR
DTS
EUR
DTS
–
29
Version Number
–
1.3.1 (current)
1.3.0 (current)
1.3.0 (current)
1.3.0 (current)
1.3.0 (current)
1.1.0
1.2.6
1.2.6
Preliminary Draft