EVA1035-H Maestro Wireless Solutions, EVA1035-H Datasheet - Page 14

• Manufacturer Part Number: EVA1035-H
• Description: GPS Development Tools SiRFStarIII GPS Eval kit SMT flash module
• Manufacturer: Maestro Wireless Solutions

Specifications of EVA1035-H

• Rohs: yes
• Product: Evaluation Kits
• Tool Is For Evaluation Of: A1035-H
• Frequency: 1.575 GHz
• Operating Supply Voltage: 3.3 V to 3.6 V
• Interface Type: USB
• Description/function: Evaluation Kit EVA1035-H allows an easy evaluation of Maestro's GPS receiver /smart antenna module A1035-H by offering quick access to the ports of the module
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Current: 31 mA
• Processor Used: GPS Module A1035-H

6.3 ICC Jumper
Figure 10: ICC jumper
As long as the VCC DIP switch is “ON” the ICC jumper is bridged. By switching off the
VCC switch the current draw of the A1035-H GPS receiver can be measured directly
by connecting a low resistance measurement device to the ICC jumper.
The low resistance measurement device should be connected before VCC is
switched off!
7 NMEA Port
• Default setting: 4800 baud, 8 data bits, no parity, 1 stop bit, no flow control!
• Standard NMEA-0183 output on NMEA, baud rate selectable.
• Standard USB connectors
8 EVA1035-H Firmware and NMEA Sentences
See separate document GPS Firmware for a detailed description of the standard
firmware loaded onto the modules delivered with the EVA1035-H.
V1.1 – Feb-11
User’s Manual
Page 14 of 18