MOD-RFID1356-BOX Olimex Ltd., MOD-RFID1356-BOX Datasheet - Page 3

no-image

MOD-RFID1356-BOX

Manufacturer Part Number
MOD-RFID1356-BOX
Description
RFID Transponder Tools USB RFID READER FOR 13.56MHz TAGS
Manufacturer
Olimex Ltd.
Datasheet

Specifications of MOD-RFID1356-BOX

Rohs
yes
Product
RFID Readers
Dimensions
50 mm x 20 mm x 5 mm
Frequency
13.56 MHz
Interface Type
USB
Operating Supply Voltage
5 V
Tool Is For Evaluation Of
RFID Tags
For Use With
ISO15693
SUPPORTED RFID TAGS/VICC:
POWER SUPPLY:
LEDS:
PC DRIVER INSTALLATION:
MOD-RFID1356 supports RFID transponder tags with the following
characteristics:
CAVEAT:
algorithm as defined in the ISO15693 standard. It will work reliably only if
there is a single VICC in the vicinity or if there is no RF collision. If there is
an RF collision, supposedly because of two VICCs with almost identical
UIDs, it might not detect both of them.
Normally the device is supplied from USB.
In normal mode the GREEN LED is on whenever the RF antenna circuit is
active and scanning for RFID tags. The RED LED switches on whenever a
valid RF TAG ID is being scanned and decoded successfully.
The LEDs can be switched off to save power consumption. See the
“Command Line Interface” section for more information.
In boot loader mode the LEDs have other meaning. See the “Firmware
Upgrade” section for more information.
Drivers for the USB HID mode are integrated in Windows XP/Vista.
The driver for USB CDC mode is available from our website. Windows
installation steps are the following:
Screen shots of the steps are shown below:
1. Download and unzip the file “MOD-RFID1356-drivers.zip” in a
2. Plug the programmer in the USB port.
3. Point the Device Wizard to the temporary directory.
4. Windows will complain that drivers are not signed. Click “Continue”.
5. Click finish.
-
-
-
-
temporary directory.
ISO15693 compliant transponders;
13,56MHz carrier frequency;
1 out of 4 transmission encoding (VCD to VICC);
High data rate (26,48kbit/s) reception encoding using one sub-
carrier frequency.
MOD-RFID1356 does not support reliably the anticollision

Related parts for MOD-RFID1356-BOX