WIZ105SR-EVB WIZnet, WIZ105SR-EVB Datasheet - Page 19

• Manufacturer Part Number: WIZ105SR-EVB
• Description: Interface Development Tools EVALUATION BOARD FOR WIZ105SR
• Manufacturer: WIZnet
• Type: Serial to Ethernetr

Specifications of WIZ105SR-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WIZ105SR
• Interface Type: Ethernet, RS-232
• Operating Supply Voltage: 3.3 V
• Dimensions: 40 mm x 62 mm x 17 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Operating Supply Current: 250 mA

Check if module is connected to the NAT or private network. If so, it is not possible to
connect to the module from outside.
ⓝ Search
The Search function is used to search all modules existing on the same LAN. By using UDP
broadcast, all modules on the same subnet will be searched.
The searched module is displayed as MAC address in the “Board list”.
ⓞ Setting
This function is to complete the configuration change.
If you select the MAC address from the “Board list”, the default configuration value of the
module will be displayed. Change the configuration and click “Setting” button to complete
the configuration. The module will re-initialize with the changed configuration. Changed
value is saved in the EEPROM of the module. Thus, the value is not removed even though
power is disconnected.
The configuration value can be changed in below steps.
①
The values configured will be displayed.
②
③
④
⑤ To check configuration result, click ‘Search’ button.
ⓟ Upload
Firmware will be uploaded through network
☞ After uploading the firmware, 20~30 seconds are required for initialization.
ⓠ Exit : Close the configuration tool program.
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
Change the value
Click “Setting” button. The configuration change will be complete.
The module will be initialized to the changed values (re
Select the mac address of which configuration value should be changed in the
-booting is processed)
“Board list.
19