WIZ105SR-EVB WIZnet, WIZ105SR-EVB Datasheet - Page 14

• Manufacturer Part Number: WIZ105SR-EVB
• Description: Interface Development Tools EVALUATION BOARD FOR WIZ105SR
• Manufacturer: WIZnet
• Type: Serial to Ethernetr

Specifications of WIZ105SR-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WIZ105SR
• Interface Type: Ethernet, RS-232
• Operating Supply Voltage: 3.3 V
• Dimensions: 40 mm x 62 mm x 17 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Operating Supply Current: 250 mA

2.2. Configuration Tool
2.2.1.
ⓐ Version : Displays firmware version.
ⓑ Enable Serial Debug Mode : If this mode is checked, you can monitor the status module
and socket message (listen OK, connect fail etc.) through serial terminal. If Debug mode is on,
debug message can cause abnormal operation of the serial device. Therefore, just use this
mode only for Debug mode.
ⓒ Board List : If you click “Search” button, all the MAC addresses on a same subnet, will be
displayed.
ⓓ IP Configuration Method: Select IP setting mode, you can select one of Static, DHCP,
PPPoE mode.
- Static: “Static” is option for setting WIZ105SR IP with static IP address. Firstly, select MAC
address which you wanted to set as static IP in the ‘board list’. Then “Local IP, Subnet,
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
Network Configuration
ⓒ
ⓐ
Figure 2. Configuration Tool (Network Config)
ⓑ
ⓛ
ⓜ
ⓓ
ⓙ
ⓔ
ⓕ
ⓖ
ⓗ
ⓘ
ⓝ
ⓚ
ⓞ
ⓟ
ⓠ
14