MAX1169EVKIT Maxim Integrated, MAX1169EVKIT Datasheet - Page 2

• Manufacturer Part Number: MAX1169EVKIT
• Description: Data Conversion IC Development Tools Evaluation System/Evaluation Kit for the MAX1169
• Manufacturer: Maxim Integrated
• Series: MAX1169r

Specifications of MAX1169EVKIT

• Interface Type: I2C, Serial

• MAX1169EVC16 (MAX1169EVKIT, 68HC16MOD-
• Two DC power supplies:
• Analog signal source: 0 to +4.096V
• Windows 2000/XP computer with an available USB
• USB cable included with the USBTO232
Caution: Do not turn on the power until all the con-
nections are completed.
1) Visit the Maxim website (www.maxim-ic.com) to
2) Verify that jumpers JU0–JU3 are connected to pins
3) Verify that jumper JU4 is OFF. This enables the
4) Verify that jumper JU5 is OFF. This disconnects the
MAX1169 Evaluation System/Evaluation Kit
Note: Indicate that you are using the MAX1169 when contacting these component suppliers.
2
MAX1169EVKIT
68HC16MODULE-DIP
HSI2CMOD
USBTO232+
Altera Corporation
Digital Core Design
Fairchild Semiconductor
TDK Corp.
ULEDIP, USBTO232, HSI2CMOD)
port to connect to the USBTO232 board
Recommended Equipment—USB Port PC
download the latest version of the USBTO232 User
Guide. Follow the steps in the USBTO232 User
Guide Quick Start section, and return to step 2 of
this Quick Start section when finished.
1-2. This sets the I
the MAX1169 to 0x7F.
internal 4.096V (typ) reference.
analog input buffer (U2) from AIN.
_______________________________________________________________________________________
+8V to +20V at 0.5A
+5V at 0.2A
PART
SUPPLIER
MAX1169EVC16 System
QTY
2
1
1
1
1
C-compatible slave address of
MAX1169 EV kit
68HC16 µC module
HS I
USB-to-COM port adapter
board
Component List
Connection Option
2
C-compatible module
DESCRIPTION
Quick Start
Procedure
(48) 32-282-82-66
800-800-3753
888-522-5372
847-803-6100
PHONE
5) Carefully connect the 68HC16 module board to the
6) Ensure that the ON/OFF switch (SW1) of the
7) Connect the +8V to +20V power supply to the ter-
8) Carefully connect the HS I
9) Connect the +5V power supply between the AVDD
10) Connect the USBTO232 board to the 68HC16MOD-
11) The MAX1169 EV kit software should have already
12) Turn on the 68HC16 module by sliding SW1 to the
13) Start the MAX1169 EV kit program by clicking on its
14) Press the OK button to automatically connect and
HELPFILE.HTM
MAX1169.EXE
INSTALL.EXE
KIT1169.C16
UNINST.INI
HS I
40-pin connector. Gently press them together. The
two boards should be flush against one another.
68HC16 module is in the OFF position.
minal block of the 68HC16 module (J2) located next
to SW1 at the top of the µC module. Observe the
polarity marked on the board.
the MAX1169 EV kit board by aligning the 20-pin
connector. Gently press them together. The two
boards should be flush against one another.
and AGND pads on the MAX1169 EV kit board.
ULE-DIP module if you have not done so already.
been downloaded and installed in the USBTO232
Quick Start.
ON position, and turn on all the power supplies.
icon in the programs section of the Windows Start |
Programs menu.
download the KIT1169.C16 file to the module.
FILE
2
C-compatible module board by aligning the
MAX1169 EV kit help file
Installs the EV kit files on your computer
Software loaded into the 68HC16 µC
Application program
Uninstalls the EV kit software
www.altera.com
www.digitalcoredesign.com
www.fairchildsemi.com
www.component.tdk.com
MAX1169EVKIT Files
Component Suppliers
DESCRIPTION
2
C-compatible module to
WEBSITE