STEVAL-MKI111V1 STMicroelectronics, STEVAL-MKI111V1 Datasheet - Page 6

• Manufacturer Part Number: STEVAL-MKI111V1
• Description: Development Boards & Kits - Other Processors LPS001WP Water Level Detection Eval BRD
• Manufacturer: STMicroelectronics

Specifications of STEVAL-MKI111V1

• Product Category: Development Boards & Kits - Other Processors
• Rohs: yes

System introduction
1.3.3
1.3.4
1.3.5
6/23
Installation
The installation of the STEVAL-MKI111V1 is described in this document.
The components must be protected against excessive strain. In particular, no components
should be bent, or isolating distances altered during transportation, handling or use. No
contact must be made with electronic components and contacts.
The STEVAL-MKI111V1 contains electrostatically sensitive components, which may be
damaged if used improperly. To avoid risk of injury, ensure that electrical components are
not mechanically damaged.
Electrical connection
Applicable accident prevention rules must be followed when working from the mains power
supply. The electrical installation must be completed in accordance with the appropriate
requirements (e.g. cross-section areas of conductors, fusing and PE connections).
Board operation
A system architecture which supplies power to the demonstration board must be equipped
with additional control and protective devices, in accordance with the applicable safety
requirements (e.g. compliance of equipment and accident prevention rules).
Doc ID 022625 Rev 1
UM1502