MAXQ610-KIT# Maxim Integrated, MAXQ610-KIT# Datasheet - Page 7

• Manufacturer Part Number: MAXQ610-KIT#
• Description: Development Boards & Kits - Other Processors MAXQ610 Eval Kit
• Manufacturer: Maxim Integrated

Specifications of MAXQ610-KIT#

• Rohs: yes
• Part # Aliases: 90-M6100#KIT

The MAXQ610 EV kit board has four general-purpose
LEDs labeled DS1, DS2, DS3, and DS4. Each anode is
connected to the board’s VDD through a 100Ω resistor,
and each cathode is connected to a processor port 3
pin through a jumper as specified in Table 3. By setting
the related port pin as an output, each LED can be illu-
minated by setting the port pin output register bit
(PO3.x) to a logic 0.
Table 3. General-Purpose LED
Connections
LED
DS1
DS2
DS3
DS4
General-Purpose Diodes
_______________________________________________________________________________________
JUMPER
JH22
JH23
JH24
JH25
PORT PIN
P3.0
P3.1
P3.2
P3.3
MAXQ610 Evaluation Kit
A USB-to-JTAG board (provided with the EV kit) is used
to program and debug applications running on the
MAXQ610 EV kit board. Connect the 10-pin ribbon
cable from the JTAG board’s J2 connector to connector
P5 on the MAXQ610 EV kit board, being careful to note
the polarity. Tools such as the Microcontroller Tool Kit
(MTK) and IAR’s Embedded Workbench have built-in
support for loading applications through the JTAG
interface and using all the MAXQ610 debug functionali-
ty (breakpoints, register and memory reading, etc.).
JTAG Interface
7