EVAL-AD5570SDZ Analog Devices, EVAL-AD5570SDZ Datasheet - Page 4

• Manufacturer Part Number: EVAL-AD5570SDZ
• Description: Data Conversion IC Development Tools evaluation board i.c.
• Manufacturer: Analog Devices
• Type: DACr

Specifications of EVAL-AD5570SDZ

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: AD5570
• Interface Type: USB
• Operating Supply Voltage: 11.4 V to 16.5 V
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Factory Pack Quantity: 1
• For Use With: EVAL-SDP-CB1Z

UG-384
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION
The
a CD. The software is compatible with Windows XP (SP2), Vista,
and Windows 7 (32-bit or 64-bit). If the setup file does not run
automatically, you can run the setup.exe file from the CD.
Install the evaluation software before connecting the evaluation
board and SDP board to the USB port of the PC to ensure that
the evaluation system is correctly recognized when connected
to the PC.
After installation from the CD is complete,
1.
2.
AD5570
Power up the
Power Supplies section. Connect the SDP board (via either
Connector A or Connector B) to the
board and then to the USB port of your PC using the
supplied cable.
When the evaluation system is detected, proceed through any
dialog boxes that appear. This completes the installation.
evaluation kit includes self-installing software on
AD5570
evaluation board as described in the
AD5570
evaluation
Figure 3. Main Window
Rev. 0 | Page 4 of 12
SOFTWARE OPERATION
To launch the software, complete the following steps:
1.
2.
From the Start menu, select Analog Devices > AD5570 >
AD5570 Evaluation Software. The main window of the
software opens (see Figure 3).
If the evaluation system is not connected to the USB port
when the software is launched, a connectivity error is
displayed (see Figure 2). Connect the evaluation board to
the USB port of the PC, wait a few seconds, click Rescan,
and follow the instructions.
Evaluation Board User Guide
Figure 2. Connectivity Error Alert