L6564TDTR STMicroelectronics, L6564TDTR Datasheet - Page 5

• Manufacturer Part Number: L6564TDTR
• Description: Power Factor Correction ICs 2.5A Single H-Side 9.5V - 35V SP Switch
• Manufacturer: STMicroelectronics

Specifications of L6564TDTR

• Rohs: yes
• Maximum Power Dissipation: 0.75 W
• Maximum Operating Temperature: + 150 C
• Mounting Style: SMD/SMT
• Package / Case: SSOP-10
• Minimum Operating Temperature: - 40 C

L6564T
1
Description
The L6564T is a current-mode PFC controller operating in transition mode (TM) and
represents the compact version of the L6563S as it embeds the same driver, reference and
control stages in a very compact 10-pin SO package.
The highly linear multiplier, along with a special correction circuit that reduces crossover
distortion of the mains current, allows wide-range-mains operation with an extremely low
THD even over a large load range.
The output voltage is controlled by means of a voltage-mode error amplifier and an accurate
(1% @T
feedforward function (1/V
also considerably improves line transient response in case of both mains drops and surges
(“bidirectional”).
In addition to overvoltage protection able to control the output voltage during transient
conditions, the IC also provides protection against feedback loop failures or erroneous
settings. Other on-board protection functions allow brownout conditions and boost inductor
saturation to be safely handled.
The totem-pole output stage, capable of a 600 mA source and 800 mA sink current, is
suitable for a high power MOSFET or IGBT drive. This, combined with the other features
and the possibility to operate with ST's proprietary fixed-off-time control, makes the device
an excellent solution for SMPS up to 400 W that requires compliance with EN61000-3-2 and
JEITA-MITI standards.
J
= 25 °C) internal voltage reference. The loop stability is optimized by the voltage
2
correction), which in this IC uses a proprietary technique that
Doc ID 022671 Rev 1
Description
5/33