AP-SDM001G1PANS-HT Apacer, AP-SDM001G1PANS-HT Datasheet - Page 25

• Manufacturer Part Number: AP-SDM001G1PANS-HT
• Description: Solid State Drives - SSD SDM2 22P/90D SATA DISK MOD SLC 1GB ST
• Manufacturer: Apacer

Specifications of AP-SDM001G1PANS-HT

• Rohs: yes
• Product: SATA Disk Modules
• Memory Size: 1 GB
• Sustained Read: 100 MB/s
• Sustained Write: 88 MB/s
• Active Mode Current: 260 mA
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 70 C
• Connector Type: 7-pin signal, 15-pin power
• Dimensions: 44 mm x 30 mm
• Minimum Operating Temperature: 0 C

SATA-Disk Module
Ⅱ Ⅱ Ⅱ Ⅱ
AP-SDMxxxx1PAXS-HT
2.1.26 Write DMA (CAh)
Write data to sectors during Ultra DMA and Multiword DMA transfer. Use the SET FEATURES command to
specify the mode value.
2.1.27 Write Multiple (C5h)
This command is similar to the Write Sectors command. Interrupts are not presented on each sector, but on
the transfer of a block which contains the number of sectors defined by Set Multiple command.
2.1.28 Write Sector(s) (30h)
Write data to a specified number of sectors (1 to 256, as specified with the Sector Counter register) from the
specified address. Specify “00h” to write 256 sectors.
24
© 2011 Apacer Technology Inc.
Rev. 1.3