GLS36VF1601G-70-4I-L1PE Greenliant, GLS36VF1601G-70-4I-L1PE Datasheet - Page 7

• Manufacturer Part Number: GLS36VF1601G-70-4I-L1PE
• Description: Flash 16M Flash 1M SRAM Industrial Temp
• Manufacturer: Greenliant

Specifications of GLS36VF1601G-70-4I-L1PE

• Rohs: yes
• Memory Type: Flash
• Memory Size: 16 Mbit
• Timing Type: Asynchronous
• Access Time: 70 ns
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2.7 V
• Maximum Operating Current: 15 mA
• Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: LFBGA-48

16 Mbit Concurrent SuperFlash
GLS36VF1601E / GLS36VF1602E
Product Identification
The Product Identification mode identifies the devices and
manufacturer. For details, see Table 3 for software opera-
tion, Figure 16 for the Software ID Entry and Read timing
diagram and Figure 26 for the Software ID Entry command
sequence flowchart. The addresses A
bank address. When the addressed bank is switched to
Product Identification mode, it is possible to read another
address from the same bank without issuing a new Soft-
ware ID Entry command.
TABLE 3: Product Identification
Note: BK = Bank Address (A
©2010 Greenliant Systems, Ltd.
Manufacturer’s ID
Device ID
FIGURE 1: Functional Block Diagram
GLS36VF1601E
GLS36VF1602E
Address
Memory
RY/BY#
BYTE#
RST#
WP#
WE#
OE#
CE#
19
-A
18
)
Address
Control
Buffers
Logic
BK0000H
BK0001H
BK0001H
Address
19
and A
18
indicate a
00BFH
734BH
734AH
Data
T3.0 1274
(8 KWord Sector Protection)
SuperFlash Memory
SuperFlash Memory
12 Mbit Bank
4 Mbit Bank
7
Product Identification Mode
Exit/CFI Mode Exit
In order to return to the standard Read mode, the Software
Product Identification mode must be exited. Exit is accom-
plished by issuing the Software ID Exit command
sequence, which returns the device to the Read mode. This
command may also be used to reset the device to the Read
mode after any inadvertent transient condition that appar-
ently causes the device to behave abnormally, e.g., not
read correctly. Please note that the Software ID Exit/CFI
Exit command is ignored during an internal Program or
Erase operation. See Table 6 for the software command
code, Figure 18 for timing waveform and Figure 27 for a
flowchart.
I/O Buffers
1274 B01.0
DQ
S71274-05-000
15
/A
-1
Data Sheet
- DQ
0
05/10