MK21FN1M0VLQ10 Freescale Semiconductor, MK21FN1M0VLQ10 Datasheet - Page 78

• Manufacturer Part Number: MK21FN1M0VLQ10
• Description: ARM Microcontrollers - MCU K20_1MB
• Manufacturer: Freescale Semiconductor

Specifications of MK21FN1M0VLQ10

• Rohs: yes
• Core: ARM Cortex M0
• Processor Series: MK21FN1
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 100 MHz
• Program Memory Size: 1 MB
• Data Ram Size: 128 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: LQFP-144
• Mounting Style: SMD/SMT
• A/d Bit Size: 16 bit
• Interface Type: CAN, I2C, I2S, SPI, UART, USB
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• On-chip Dac: Yes
• Program Memory Type: Flash
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 1.71 V

P&E Microcomputer
Systems
Multilink and Cyclone
USB Multilink Debug Interfaces
P&E Microcomputer Systems’ USB multilinks
are affordable, development-oriented interfaces
that allow access to the debug interface on
a target MCU from the user’s PC. The new
Multilink Universal and Multilink Universal
FX combine support in a single interface
for many Freescale architectures, including
Vybrid controller solutions and Kinetis MCUs.
The FX version also provides much higher
communications speeds for some architectures
(up to a 10x speed improvement), and can
be used to power the target device. These
“universal” Multilinks include ribbon cables
SEGGER
J-Link and Flasher
Designed using SEGGER’s industry-leading
embedded software, SEGGER’s development
and production tools offer a wide array of
advanced features and boast support for a
broad spectrum of MCUs and MPUs, including
Freescale i.MX processors, Kinetis MCUs and
Vybrid controller solutions.
J-Link Industry-Leading JTAG/
SWD Probe
J-Link is the de facto standard for JTAG
probes in the ARM
for its ease of use and setup. The unlimited
flash breakpoints technology lifts the limited
availability of breakpoints when debugging in
flash memory. Additionally the J-Link comes
with incredibly fast flash download algorithms,
which are complemented by the very high
download speed of up to 1.5 Mb/s (J-Link
ULTRA). J-Link is supported by all popular
tool-chains, such as CodeWarrior, TrueStudio,
MDK, Embedded Workbench and any GDB-
based debug solution.
78
®
world and is known
Embedded Solutions Based on ARM
to allow connections to all of the supported
architectures. P&E’s Multilinks are supported by
CodeWarrior as well as toolchains from Keil,
IAR, Cosmic and others.
The J-Link is available in a variety of models to
fit every development/production need:
• J-Link
• J-Link ULTRA (higher performance)
Multilink and Cyclone
J-Link
IDEs and Hardware Emulators/Debuggers
IDEs and Hardware Emulators/Debuggers
®
Cyclone Production Programmers
P&E’s Cyclone products are geared towards
in-circuit production programming, including
both low-volume, operator-controlled
programming and high-volume automated
programming. The Cyclone can be used to
program both internal memory on a Freescale
processor/MCU as well as external memory
connected to the processor’s address/data bus.
For more information, visit pemicro.com.
• J-Link ULTRA+ (higher performance,
• J-Link PRO (adds Ethernet interface,
• J-Trace ARM Cortex™-M (including
• J-Link Lite (very small form factor, emulator
Flasher ARM
Flasher ARM uses the same fast flash download
algorithms as the J-Link and offers multiple
connectivity options to easily integrate into any
production environment. The Flasher can be
connected by USB, RS232 or Ethernet. The
operation of the Flasher can be triggered by
pressing a button, by command-line interface,
by graphical user interface, or by terminal or
two-wire-handshake hardware interface.
For more info, visit segger.com/jlink.html.
Technology
all enhancement module licenses)
all enhancement module licenses)
embedded trace macrocell support)
solution for evaluation boards)
®
Production Tool