BQ2001-9R Power-One, BQ2001-9R Datasheet

no-image

BQ2001-9R

Manufacturer Part Number
BQ2001-9R
Description
BQ Series 97W Sinlge Ouput 5.1V DC/DC Converter
Manufacturer
Power-One
Datasheet
BCD20011-G Rev AD, 22-Dec-09
Description
These extremely compact DC-DC converters incorporate all
necessary input and output filtering, signaling, and protection
features, which are required in the majority of applications.
The converters provide important advantages such as flexible
output power through primary current limitation, high
efficiency, excellent reliability, very low ripple and RFI noise
levels, full input to output isolation, negligible inrush current,
overtemperature protection, and input over-/undervoltage
lockout. The converter inputs are protected against surges
and transients occurring on the source lines.
The
environment, such as railway applications. They have been
designed in accordance with the European railway standards
EN 50155 and EN 50121-3-2. All printed circuit boards are
coated with a protective lacquer.
The outputs are continuously open- and short-circuit proof. An
isolated output Power Good signal and LEDs at the front panel
indicate the status of the converter. Test sockets at the front
Table of Contents
Description .......................................................................... 1
Model Selection .................................................................. 2
Functional Description ........................................................ 5
Electrical Input Data ............................................................ 6
Electrical Output Data ......................................................... 8
Auxiliary Functions ............................................................ 16
converters
20
0.8"
4 TE
are
164
6.5"
®
particularly
111
4.4"
3 U
suitable
for
rugged
Page
Page 1 of 26
panel allow for a check of the main output voltage.
Full system flexibility and n+1 redundant operating mode are
possible due to virtually unrestricted series or parallel
connection capabilities of all outputs. In parallel connection of
several converters, automatic current sharing is provided by a
single-wire interconnection.
As a modular power supply or as part of a distributed power
supply system, the extremely low profile design significantly
reduces the necessary power supply volume without
sacrificing high reliability. A temperature sensor disables the
outputs, if the case temperature exceeds the limit. The outputs
are automatically re-enabled, when the temperature drops
below the limit.
The fully enclosed, black-coated aluminum case acts as a heat
sink and an RFI shield. The converters are designed for 19"
DIN-rack systems occupying 3U/4TE only, but can also be
chassis-mounted by means of four screws. It is possible to fit
an additional heat sink.
Electromagnetic Compatibility (EMC) ............................... 19
Immunity to Environmental Conditions ............................. 21
Mechanical Data ............................................................... 22
Safety and Installation Instructions ................................... 23
Description of Options ...................................................... 24
Accessories ....................................................................... 26
Features
• RoHS lead-free-solder and lead-solder-exempted
• Wide input voltage ranges up to 150 VDC
• 1 or 2 isolated outputs from 3.3 to 48 VDC
• Class I equipment
• Extremely high efficiency of up to 90%
• Flexible output power
• Excellent surge and transient protection
• Outputs open- and short-circuit proof
• Redundant operation, current sharing
• Extremely low inrush current, hot swappable
• Externally adjustable output voltage and inhibit
• Electric strength test 2.1 kVDC
• Very compact (<20 mm profile)
• Railway standards observed
• Telecoms-compatible input voltage range of 48Q
products are available
models according to ETS 300132-2 (38.4 – 75 VDC)
Safety according to IEC/EN 60950-1, UL/CSA 60950-1
66 – 132 Watt DC-DC Converter
Q Series Data Sheet
www.power-one.com
Page

Related parts for BQ2001-9R

BQ2001-9R Summary of contents

Page 1

... DIN-rack systems occupying 3U/4TE only, but can also be chassis-mounted by means of four screws possible to fit an additional heat sink. Page Electromagnetic Compatibility (EMC) ............................... 19 Immunity to Environmental Conditions ............................. 21 Mechanical Data ............................................................... 22 Safety and Installation Instructions ................................... 23 Description of Options ...................................................... 24 Accessories ....................................................................... 26 Page Series Data Sheet 66 – 132 Watt DC-DC Converter www.power-one.com Page ...

Page 2

... BQ1101-9 81* GQ1101-9 BQ1001-9R 85 GQ1001-9R 85.5 - B1, G BQ2320-9R 86 GQ2320-9R BQ2540-9R 87 GQ2540-9R 86.5 - B1, G BQ2660-9R 88 GQ2660-9R BQ2001-9R 85 GQ2001-9R 85.5 -7, B, B1, G BQ2320-9R 86 GQ2320-9R BQ2540-9R 87 GQ2540-9R 86.5 - B1, G BQ2660-9R 88 GQ2660-9R Operating input voltage range, efficiency η η η η η η η η η η ...

Page 3

... Option P excludes feature R and vice versa always placed at the end of the part number. Consult Power-One for availability! Example: CQ2540-9P: DC-DC converter, input voltage range 33.6 – double-output model, each output providing 15 V/ 3.3 A, equipped with potentiometer to adjust the output voltages, operating ambient temperature T Note: All models have the following auxiliary functions, which are not shown in the type designation: input and output filter, inhibit, sense lines, current sharing, Out OK signal, LED indicators, and test sockets (not 48Q models) ...

Page 4

... Product Marking Type designation, applicable safety approval and recognition marks, CE mark, warnings, pin allocation, Power-One patents, and company logo. Identification of LEDs, test sockets, and potentiometer. Input voltage range and input current, nominal output voltages and currents, degree of protection, batch no., serial no., and data code including production site, version (modification status), and date of production ...

Page 5

... Out OK– Vo+ 4 Vo+ 6 Vo– Vo– 1 S– not connect 03112a 2 Out OK+ 22 Out OK– Vo2+ 6 Vo2– Vo1+ 4 Vo1– S– not connect www.power-one.com ...

Page 6

... Watt DC-DC Converter GQ CQ typ max min typ max 54 33 100 3.0 2.2 3.0 2.5 1.5 1 110 typ max min typ max 43 108 65 150 n.a. 65 168 36 115 55 176 72 110 0 125 0 200 1.5 1.0 5.5 5.0 3.5 3 20* 20* www.power-one.com Unit Unit ...

Page 7

... Recommended values for C JM001 Vi+ Vo Vo– Vi– ext Capacitance Voltage ≥680 μ ≥470 μ ≥470 μF 100 V ≥470 μF 100 V ≥150 μF 125 V ≥68 μF 200 V www.power-one.com + R . ext ext ...

Page 8

... Q Series Data Sheet 66 – 132 Watt DC-DC Converter 48Q / BQ – GQ1001 48Q / BQ – GQ2320 5 min typ max min typ 5.07 5.13 11.94 5.02 5.18 11.82 5.9 6.4 13 16/ 8 20.8/26 8.4/10.5 10.4/12 82/102 96/120 ±250 ±200 800 1500 0.5 4.0 5.6 7.2 4.6 5.6 10.8 www.power-one.com Unit max 12.06 V 12.18 15.0 3 8.0/ μs 0.8 V 13.2 13.2 ...

Page 9

... C max , see Dynamic load regulation. o Page Series Data Sheet 66 – 132 Watt DC-DC Converter 48Q /BQ – GQ2660 24 V max min typ 15.08 23.88 24.12 15.23 23.64 24.36 19 27.5 3 6.6/8.0 0 4.4/5.5 4 8.6/10.4 4.6/5.75 6.2/8 106/132 ±600 800 0.8 6 16.5 14.4 16.5 21.6 www.power-one.com Unit max μs 1.2 V 26.4 26.4 ...

Page 10

... V /15 V Output 1 Output 2 typ max min typ max min 12.12 14.93 15.08 14.85 14.78 15.23 see Output Voltage Regulation 15 n. 7.2/9.2 0.6 6.0/7.4 0.6 4.0 3 10.4/13 6.9/8.4 8.6/10.4 6.9/8 99/120 ±200 ±300 1500 9.0 16.5 see Output Voltage Regulation 13.5 16.5 www.power-one.com Unit typ max 15. 6.0/7 8.6/10 μs V ...

Page 11

... Watt DC-DC Converter BQ – GQ2660 24 V /24 V Output 1 Output 2 typ max min typ max min 24.24 23.88 24.12 23.76 23.64 24.36 see Output Voltage Regulation 30 n.a. 27.5 4.0 0.4 5.1 0.4 2.2 2.2 6.2 5.8 8.0 5 132 ±400 400 3 14.4 26.4 see Output Voltage Regulation 21.6 26.4 Unit typ max 24. 5.1 A 2.2 8 ±500 mV μs V www.power-one.com ...

Page 12

... Page Series Data Sheet 05092a Vo2+ Vo2– Vo1+ S+ S– Vo1– Vo2+ Vo2– Vo1+ S+ S– Vo1– 06114a T Vo2+ Vo2– Vo1+ S+ S– Vo1– Vo2+ Vo2– Vo1+ S+ S– Vo1– R www.power-one.com ...

Page 13

... If the o1 nom ), its voltage will rise o nom , the deviation nom . The following figures explain the regulation with o nom , provided that the o nom . o min www.power-one.com , but R and ± 05102c remains within ...

Page 14

... Watt DC-DC Converter approximately 1.25 • output is monitored). This nd control loop may under boundary conditions. 01 ≤ However, a small current should max + I > both output voltages are max o nom o max o L 05114c 05104b 0.2 0.4 0.6 0.8 1.0 1.2 www.power-one.com o nom nom 1.4 ...

Page 15

... A below 85 ° > 50 °C and P > See fig. 17a nom www.power-one.com forced cooling C max A 100 °C C max A 80 °C o nom to 50 ° max = 50 ° max ...

Page 16

... T C min C max V = off 2 – – 500 inh inh +500 inh nom [V] (on/off switching 48Q CQ GQ DQ* 1.5 3 1.5 1.5 1.5 0.5 0 www.power-one.com typ max Unit 0.8 VDC 50 μA –40 06159a EQ* Unit 2 ms 0.5 1.5 3 ...

Page 17

... nom [kΩ Ω Ω Ω Ω [ 1020 24.5 49 1690 619 25 50 453 25.5 51 316 26 52 267 26.4 52.8 221 www.power-one.com . ext R 2 Load (to 2 [kΩ Ω Ω Ω Ω 6.65 2 8.06 2 9.76 12.1 15.4 20 23.7 28.0 34.8 44.2 60.4 90.9 [kΩ Ω Ω Ω Ω 866 590 442 ...

Page 18

... LED Out OK Operating condition green normal operation x incorrect sense line connection off overtemperature overload output overvoltage output undervoltage green not possible off no input voltage input voltage too low input voltage too high inhibit input open/high www.power-one.com Unit S– V ...

Page 19

... MHz 2100 – 2500 MHz 50 Ω positive 60 s negative transients per ms coupling mode 12 Ω 5 pos. and 5 neg. surges per 2 Ω coupling mode <100 A 3 pos. 5 repetitions 150 Ω 0.15 – 80 MHz www.power-one.com mobile In Perf. 2 oper. crit. yes A yes A yes B yes A yes A ...

Page 20

... Testdistance 10 m, BQ2660-7R V104 = = 4 55011 A 100 200 500 TÜV-Divina, ESVS 30:R&S, BBA 9106/UHALP 9107:Schwarzb., QP, 2009-04-17 Testdistance 10 m, EQ2660-7R V104 =110 = 4 55011 A 50 100 200 500 www.power-one.com JM021 20 MHz 1000 MHz 1000 MHz ...

Page 21

... C max Ground Naval, Device mobile sheltered hours 50 °C 40 °C 74 000 6 400 000 98 000 192 000 57 700 152 000 97 000 188 000 www.power-one.com Status Converter not operating Converter not operating Converter operating Converter operating Converter operating Converter operating Converter operating ...

Page 22

... AIRFLOW 111 104 100 95 LED "In-OK" green Potentiometer (option P) Test sockets LED "Out-OK" green 1 Not fitted to 48Q models . A Page Series Data Sheet 09066d European Projection Front plate Main- face 60 Back plate 1 = ∅ 4.2 = ∅ 3 ∅ 3 www.power-one.com Rear- face ...

Page 23

... Out-OK and output, based on their maximum rated input voltage • Functional insulation between outputs and output to case • Use in a pollution degree 2 environment Page Series Data Sheet 66 – 132 Watt DC-DC Converter shall not be exceeded. See also Thermal C max www.power-one.com ...

Page 24

... EN 50116 and IEC/EN 60950-1, and should not be repeated in the field. Power-One will not honor any warranty claims resulting from electric strength field tests. Safety of Operator-Accessible Output Circuits If the output circuit of a DC-DC converter is operator- accessible, it shall be an SELV circuit according to IEC 60950 ...

Page 25

... The front end output voltage should match the specified input voltage range of the DC-DC converter. 2 The maximum rated input voltage of EQ models acc. to IEC/EN 60950 is 150 V. Power-One specifies the tolerance as +12% (max. 168 V) 3 The earth connection has to be provided by the installer according to IEC/EN 60950. ...

Page 26

... Brackets for DIN-rail and chassis mounting NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of Power-One, Inc. ...

Related keywords