STM-16 ETC2 [List of Unclassifed Manufacturers], STM-16 Datasheet - Page 3

• Manufacturer Part Number: STM-16
• Description: 16 fold Spectroscopy Amplifier with Discriminators and Multiplicity Trigger
• Manufacturer: ETC2 [List of Unclassifed Manufacturers]

mesytec
Remote Control
The STM-16 can be equipped with a remote con-
trol option which is separately available .
The NIM-controller module MRC-1 is necessary
as a bus master. One MRC-1 can control 32 vari-
ous mesytec modules. Communication with a
control PC is done via RS-232 serial interface.
The discriminator thresholds can be individually
adjusted from
steps
The gain can be adjusted for pairs of channels in
16 steps:
The parameters are organised in a 32 word mem-
ory array. The gain parameters are situated at the
even position 0,4,8...30 (channel 1/2 .. channel
15/16) , the thresholds are situated at the odd posi-
tions 1...31 (channel 1..16)
The commands are transmitted via event bus,
which can be connected to the rear side of the
STM-16 module. The ID-number which is set
with the coder identifies the module in the bus
chain and must be unique for one bus line.
.
0..40% of the maximum range in 256
setting 0 = gain 1,
.
.
setting 15 = gain20,
fon: +49 - 89 / 456007-30, fax : +49 - 89 / 456007-50
wernher-von-braun- str. 1, 85640 putzbrunn, germany
[e-mail] - www.mesytec.com
mesytec GmbH & Co. KG
STM-16+
Rear side of STM-16:
Coder for 16 bus addresses (0..F)
Bidirectional event bus
Power supply output for preamp MPR-
16
Timing filter sum outputs in groups
of 4 channels (1-4, 5-8, 9-12, 13-16)
16 fold shaper with timing
3/6