ADC-8032A ETC [List of Unclassifed Manufacturers], ADC-8032A Datasheet - Page 37

• Manufacturer Part Number: ADC-8032A
• Description: Analog Composite to SDI Decoder
• Manufacturer: ETC [List of Unclassifed Manufacturers]

ADC-8032A User Manual (Iss. 04)
Bank
Bank
C
C
SW1 Function Select
SW1 Function Select
Bank C-8: Freeze Mode
The input image can be frozen (ADC-8032A-S only) if any of the following conditions occur:
The Freeze Mode function allows you to set the type of freeze that occurs: Field 1, Field 2, or Full
Frame. Use the following steps to set the freeze mode:
Bank C-9: Forced Freeze
The output can be manually frozen (ADC-8032A-S only) using the Forced Freeze mode. When
enabled, the freeze will affect either field 1, field 2 or the entire frame (as determined by the Freeze
Mode function).
Use the following steps to enable or disable the Forced Freeze mode:
9
8
•
•
•
1. Select Bank C, and rotate Function Select to position 8.
2. Select the desired mode according to the table below:
1. Select Bank C, and rotate Function Select to position 9.
2. Select the desired mode:
The user selects Manual Freeze (Forced Freeze, Bank C, Position 9)
There is a loss of input signal (Input Loss Mode, Bank C, Position A)
A hotswitch occurs (Hotswitch Mode, Bank C, Position B)
•
•
•
•
SW2 Mode Select
+
-
SW2 Mode Select
+
-
Toggle Mode Select up to advance up the list.
Toggle Mode Select down to descend down the list.
Toggle Mode Select up to freeze the image. The FREEZE LED is on.
Toggle Mode Select down to un-freeze the image, and allow input video to
pass through. The FREEZE LED is off.
Freeze
Pass Through
Field 2
Frame
Field 1
FRZ MODE
FREEZE
Heads-Up Display Label
Heads-Up Display Label
PASS
FRAME
FORCE
FLD 2
FLD 1
Using Banks • 4-19
Default
FLD 1
Default
PASS