LC104S1 ETC1 [List of Unclassifed Manufacturers], LC104S1 Datasheet - Page 26

• Manufacturer Part Number: LC104S1
• Description: PRELIMINARY SPECIFICATION
• Manufacturer: ETC1 [List of Unclassifed Manufacturers]

9-3. ELECTROSTATIC DISCHARGE CONTROL
9-4. PRECAUTIONS FOR STRONG LIGHT EXPOSURE
9-5. STORAGE
9-6. HANDLING PRECAUTIONS FOR PROTECTION FILM
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain
that treatment persons are connected to ground through wrist band etc. And don’t touch interface pin directly.
Strong light exposure causes degradation of polarizer and color filter.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
(2) The polarizer surface should not come in contact with any other object.
(1) When the protection film is peeled off, static electricity is generated between the film and polarizer.
(2) The protection film is attached to the polarizer with a small amount of glue. If some stress is applied
(3) When the module with protection film attached is stored for a long time, sometimes there remains a
(4) You can remove the glue easily. When the glue remains on the polarizer surface or its vestige is
When storing modules as spares for a long time, the following precautions are necessary.
temperature between 5° C and 35° C at normal humidity.
It is recommended that they be stored in the container in which they were shipped.
This should be peeled off slowly and carefully by people who are electrically grounded and with well
ion-blown equipment or in such a condition, etc.
to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to
remain on the polarizer.
Please carefully peel off the protection film without rubbing it against the polarizer.
very small amount of glue still on the polarizer after the protection film is peeled off.
recognized, please wipe them off with absorbent cotton waste or other soft material like chamois
soaked with normal-hexane.
Vernissakatu 8A
01300 Vantaa, Finland
http://www.alpha.fi
Alpha Point Ltd.
Liquid Crystal Display LC104S1-A1
Tel.: [phone]
Fax: [phone]
SPECIFICATION
Page 26 / 28