EDD51321DBH-5BTS-F ELPIDA [Elpida Memory], EDD51321DBH-5BTS-F Datasheet - Page 16

• Manufacturer Part Number: EDD51321DBH-5BTS-F
• Manufacturer: ELPIDA [Elpida Memory]

Row address strobe and bank activate [ACT]
This command activates the bank that is selected by BA0 and BA1 (See Bank Select Signal Table) and determines
the row address (Address Pins Table in “Pin Function”).
Precharge selected bank [PRE]
This command starts precharge operation for the bank selected by BA0 and BA1. (See Bank Select Signal Table)
[Bank Select Signal Table]
Bank 0
Bank 1
Bank 2
Bank 3
Remark: H: VIH. L: VIL.
Precharge all banks [PALL]
This command starts a precharge operation for all banks.
Refresh [REF/SELF]
This command starts a refresh operation. There are two types of refresh operation, one is auto-refresh, and another
is self-refresh. For details, refer to the CKE truth table section.
Mode register set/Extended mode register set [MRS/EMRS]
The DDR Mobile RAM has the two mode registers, the mode register and the extended mode register, to defines
how it works. The both mode registers are set through the address pins in the mode register set cycle. For details,
refer to "Mode register and extended mode register set".
Preliminary Data Sheet E1398E40 (Ver. 4.0)
BA0
L
H
L
H
16
BA1
L
L
H
H
EDD51321DBH-TS