COP8SBE9 NSC [National Semiconductor], COP8SBE9 Datasheet - Page 54

• Manufacturer Part Number: COP8SBE9
• Description: 8-Bit CMOS Flash Microcontroller with 8k Memory, Virtual EEPROM and Brownout Reset
• Manufacturer: NSC [National Semiconductor]

www.national.com
11.0 MICROWIRE/PLUS
clock. The SIO register is shifted on each falling edge of the
SK clock. In the alternate SK phase operation, data is shifted
in on the falling edge of the SK clock and shifted out on the
rising edge of the SK clock. Bit 6 of Port G configuration
register selects the SK edge.
SK Phase
Alternate
Alternate
Normal
Normal
FIGURE 31. MICROWIRE/PLUS SPI Mode Interface Timing, Alternate SK Mode, SK Idle Phase being Low
FIGURE 32. MICROWIRE/PLUS SPI Mode Interface Timing, Normal SK Mode, SK Idle Phase being High
FIGURE 30. MICROWIRE/PLUS SPI Mode Interface Timing, Normal SK Mode, SK Idle Phase being Low
G6 (SKSEL)
Config. Bit
TABLE 26. MICROWIRE/PLUS Shift Clock Polarity and Sample/Shift Phase
0
1
0
1
Port G
(Continued)
G5 Data
Bit
0
0
1
1
SO Clocked Out On:
SK Falling Edge
SK Falling Edge
54
SK Rising Edge
SK Rising Edge
A control flag, SKSEL, allows either the normal SK clock or
the alternate SK clock to be selected. Refer to Table 26 for
the appropriate setting of the SKSEL bit. The SKSEL is
mapped into the G6 configuration bit. The SKSEL flag will
power up in the reset condition, selecting the normal SK
signal provided the SK Idle Polarity remains LOW.
SI Sampled On:
SK Falling Edge
SK Falling Edge
SK Rising Edge
SK Rising Edge
20032736
20032738
20032737
SK Idle
Phase
High
High
Low
Low