NCP5008_06 ONSEMI [ON Semiconductor], NCP5008_06 Datasheet - Page 16

• Manufacturer Part Number: NCP5008_06
• Description: Backlight LED Boost Driver
• Manufacturer: ONSEMI [ON Semiconductor]

LAYOUT EXAMPLE
layout based on the basic application Figure 1. This
application has been routed on a single copper layer to save
cost. A dual side PCB has better noise protection and can
be the right choice for an industrial system. In order to
avoid voltage spikes, care must be observed to group the
capacitors, the inductor, the Schottky diode and the
The Figure 28 represents the typical printed circuit
Figure 28. Typical Printed Circuit Layout
(the Top Silk Screen and the Top Layer)
NCP5008, NCP5009
http://onsemi.com
16
integrated circuit in the same area. On the other hand, using
large copper tracks to reduce the resistor connectivity is
strongly recommended.
Load are for engineering purpose only and not for final
application.
Obviously, the connectors GND, CLK, CS, V
bat
and