TDA5252G2 INFINEON [Infineon Technologies AG], TDA5252G2 Datasheet - Page 70

• Manufacturer Part Number: TDA5252G2
• Description: ASK/FSK 915MHz Wireless Transceiver
• Manufacturer: INFINEON [Infineon Technologies AG]

Figure 3-32
Description:
Assumption: the ON time comes right after the first frame (Case A). If OFF time is 135ms the
receiver turns on during Sync-pulses and the PwdDD- pulse wakes up the µP.
If the ON time is in the center of the 50ms gap of transmission (Case B), the Data Detect Logic will
wake up the µP 135ms later.
If ON time is over just before Sync-pulses (Case C), next ON time is during Data transmission and
Data Detect Logic will trigger a PwdDD- pulse to wake up the µP.
Note: In this example it is recommended to use the Peak Detector for slicer threshold generation,
because of its fast attack and slow release characteristic. To overcome the data zero gap of 50ms
larger external capacitors than noted in Section 4.4 at pin12 and 13 are recommended. Further
information on calculating these components can be taken from Section 3.6.2.
Data Sheet
3 possible timings
Case A:
Case B:
Case C:
... Receiver enabled
50ms
50ms
50ms
Data
Data
Data
15ms
15ms
15ms
135ms
Data
Data
Data
135ms
135ms
70
Interrupt
due PwdDD
µP enables Receiver
until Data completed
Data
Data
Interrupt
due PwdDD
Data
µP enables Receiver
until Data completed
Interrupt
due PwdDD
µP enables Receiver
until Data completed
Data
Data
Data
t [ms]
t [ms]
t [ms]
TDA5252 G2
Version 1.1
Application
data_timing021.wmf
2007-02-26