AT89C5122 ATMEL [ATMEL Corporation], AT89C5122 Datasheet - Page 92

• Manufacturer Part Number: AT89C5122
• Description: MICROCONTROLLER WITH USB AND SMART CARD READER INTERFACES
• Manufacturer: ATMEL [ATMEL Corporation]

Procedure for CVcc = 5volts
92
AT8xC5122/23
The DC/DC pump mode must be selected (MODE = 0 in DCCKPS register). The
detailed procedure is described in flow chart of Figure 48. VCC must be higher than 4.0
Volts.
Figure 48. Card Vcc = 5V Initialization Procedure
While VCC remains higher than 4.0V and startup current lower than 30 mA (depending
on the load type), the DC/DC converter should be ready without having to increment
BOOST[1:0] bits beyond [0:0] level. If VCC > 4.0V and startup current > 30 mA, it will be
necessary to increment the BOOST[1:0] bits until the DC/DC converter is ready.
SCCON CardVcc=1
Set Timeout to 3 ms
SCICR.7=Reset=1
SCICR.7=Reset=0
BOOST[1:0]=[0:0]
VCARD[1:0] = 11
DCCKPS[7]=0
VCARDOK=1
Mode Pump
BOOST [1:0]
BOOST[1:0]
= max = 3?
Increment
Timeout
Expired
DC/DC Initialization
Failure
DC/DC Initialization
current overflow
BOOST[1:0]
BOOST[1:0]
to adjust the
Decrement
Successful
= [0:0]
4202D–SCR–06/05