MCP2210 MICROCHIP [Microchip Technology], MCP2210 Datasheet - Page 44

• Manufacturer Part Number: MCP2210
• Description: USB-to-SPI Protocol Converter with GPIO (Master Mode)
• Manufacturer: MICROCHIP [Microchip Technology]

MCP2210
TABLE 3-40:
DS22288A-page 44
Index
18-63
Byte
17
Other Chip Settings – Enable/Disable Wake-up, Interrupt Counting, SPI Bus Release Options
• Bit 7 – Don’t Care
• Bit 6 – Don’t Care
• Bit 5 – Don’t Care
• Bit 4 – Remote Wake-up Enabled/Disabled
• Bit 3 – Dedicated Function – Interrupt Pin mode
• Bit 2 – Dedicated Function – Interrupt Pin mode
• Bit 1 – Dedicated Function – Interrupt Pin mode
• Bit 0 – SPI Bus Release Enable
Reserved (fill in with 0x00)
- 0 – Remote Wake-up Disabled
- 1 – Remote Wake-up Enabled
- b111 – Reserved
- b110 – Reserved
- b101 – Reserved
- b100 – Count High Pulses
- b011 – Count Low Pulses
- b100 – Count High Pulses
- b011 – Count Low Pulses
- b010 – Count Rising Edges
- b001 – Count Falling Edges
- b000 – No Interrupt Counting
- 0 = SPI Bus is Released between transfer
- 1 = SPI Bus is Not Released by the MCP2210 between transfers
COMMAND STRUCTURE (CONTINUED)
Meaning
 2011 Microchip Technology Inc.