MC68HC05P9ACDW FREESCALE [Freescale Semiconductor, Inc], MC68HC05P9ACDW Datasheet - Page 106

• Manufacturer Part Number: MC68HC05P9ACDW
• Description: HCMOS Microcontroller Unit
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

SIOP
Operation
106
The master MCU initiates and controls the transfer of data to and from
one or more slave peripheral devices. In master mode, a transmission is
initiated by writing to the SIOP data register (SDR). Data written to the
SDR is parallel-loaded and shifted out serially to the slave device(s).
Many simple slave devices are designed to only receive data from a
master or to only supply data to a master. For example, when a
serial-to-parallel shift register is used as an 8-bit port, the master MCU
initiates transfers of 8-bit data values to the shift register. Since the
serial-to-parallel shift register does not send any data to the master, the
MCU ignores whatever it receives as a result of the transmission.
The SIOP is simpler than the serial peripheral interface (SPI) on some
other Motorola MCUs in that:
A mask option allows the SIOP to transfer data MSB first or LSB first.
•
•
•
Freescale Semiconductor, Inc.
For More Information On This Product,
The polarity of the serial clock is fixed.
There is no slave select pin.
The direction of serial data does not automatically switch as on the
SPI because the SIOP is not intended for use in multimaster
systems. Most applications use one MCU as the master to initiate
and control data transfer between one or more slave peripheral
devices.
Go to: www.freescale.com
SIOP
8-mc68hc05p9a
MOTOROLA