PCF85116-3TD PHILIPS [NXP Semiconductors], PCF85116-3TD Datasheet - Page 4

• Manufacturer Part Number: PCF85116-3TD
• Description: I2C Demonstration Board 2005-1 Quick Start Guide
• Manufacturer: PHILIPS [NXP Semiconductors]

Philips Semiconductors
3. Installation
UM10206
User manual
3.1 Win-I2CUSB Lite Software
3.2 Demonstration Board hardware connection to computer USB port
3.3 Connecting the remote sensor diode
Do not contact The Boardshop for application support issues.
1. Download the Win-I2CUSB Lite installation driver from:
2. The installation software will automatically start from the executable file. If the
3. For software or hardware application support email us at: [e-mail].
1. Touch the bare metal on the rear of your computer to neutralize any ESD (static
2. Connect the hardware to a USB port using a standard USB cable.
3. The green USB_LINK LED on the hardware will illuminate.
1. Connect the red wire to the D+ pin and the white wire to the D− pin (see
2. Plug the remote sensor diode into the Demonstration Board (see
Fig 1. I2C Demonstration Board 2005-1 remote sensor diode
www.semiconductors.philips.com/products/interface_control/i2c.
installation software does not start automatically double-click on the Setup.exe file.
charge) before removing the Demonstration Board Hardware from the packaging.
(1) The cable is approximately 15cm long with the red wire connected to the emitter.
(2) The 2-pin male connector is compatible with the 2-pin header on the pcb.
(3) The base and collector of the transistor are connected together.
Rev. 01 — 13 June 2006
D+
D−
I2C Demonstration Board 2005-1 Quick Start Guide
(2)
(1)
(3)
013aaa000
2N3906
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Figure
UM10206
Figure
2).
1).
4 of 12