cxl1506m Sony Electronics, cxl1506m Datasheet - Page 6

• Manufacturer Part Number: cxl1506m
• Description: Cmos-ccd 1h/2h Delay Line For Pal
• Manufacturer: Sony Electronics

2) This is the IC supply current value during clock and signal input.
3) GL is the output gain of pin OUT when a 500mVp-p, 200kHz sine wave is fed to pin IN.
4) Indicates the dissipation at 4.434MHz in relation to 200kHz. From the output voltage at pin OUT when a
5) The differential gain (DG) and the differential phase (DP), when the 5-staircase wave in the following figure
Notes)
1) By switching SW2, input condition turns out as follows.
GL = 20 log
150mVp-p, 200kHz sine wave is fed to pin IN, and from the output voltage at pin OUT when a 150mVp-p,
4.434MHz sine wave is fed to same, calculation is made according to the following formula.
fR = 20 log
is fed, are tested with a vector scope:
SW2 condition
a
b
pin OUT output voltage (4.434MHz) [mVp-p]
pin OUT output voltage [mVp-p]
pin OUT output voltage (200kHz) [mVp-p]
Center bias condition (approx. 2.1V)
Approx. 2.1V bias is applied internally to the input signal
Sync tip and clamp conditions
500 [mVp-p]
1H 64µs
Input condition
[dB]
– 6 –
[dB]
150mV
275mV
150mV
500mV
CXL1506M/N