VDIP1_10 FTDI [Future Technology Devices International Ltd.], VDIP1_10 Datasheet - Page 7

• Manufacturer Part Number: VDIP1_10
• Description: Vinculum VNC1L Module
• Manufacturer: FTDI [Future Technology Devices International Ltd.]

3.3 I/O Configuration Using The Jumper Pin Header
Two three way jumper pin headers are provided to allow for simple configuration of the I/O on data and
control bus pins of the VDIP1. This is done by a combination of pulling up or pulling down the VNC1L
ACBUS5 (pin 46) and ACBUS6 (pin 47). The relevant portion of the VDIP1 module schematic is shown in
Figure 3.2
Table 3.2 - VDIP1 Port Selection Jumper Pins
Pull-Up
Pull-Up
Pull-Down
Pull-Down
Figure 3.2 – VDIP1 On-Board Jumper Pin Configuration.
(VNC1L pin 47)
ACBUS6
Copyright © 2010 Future Technology Devices International Limited
`
Pull-Up
Pull-Down
Pull-Up
Pull-Down
(VNC1L pin 46)
VDIP1 Vinculum VNC1L Module Datasheet Version 1.01
ACBUS5
Document Reference No.: FT_000016
Clearance No.: FTDI# 131
Serial UART
SPI
Parallel FIFO
Serial UART
I/O Mode
6