pn5321a3hn/c101 NXP Semiconductors, pn5321a3hn/c101 Datasheet - Page 10
pn5321a3hn/c101
Manufacturer Part Number
pn5321a3hn/c101
Description
Nfc Controller
Manufacturer
NXP Semiconductors
Datasheet
1.PN5321A3HNC101.pdf
(25 pages)
Philips Semiconductors
9397 750 XXXXX
Short form data sheet
9.1.3 Operating Modes
The CL module support the following operating modes:
The modes support different transfer speeds and modulation schemes. The following
chapters will explain the different modes more in detail.
Note: All indicated modulation indexes and modes in this chapter are system parameters.
This means that beside the IC settings a suitable antenna tuning is required to achieve the
optimal performance.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
typical operating distance in NFCIP-1 mode up to 50 mm depending on the antenna
size and tuning and power supply
typical operating distance in ISO 14443A / MIFARE
mode of about 100 mm depending on the antenna size and tuning and the external
field strength
Supports MIFARE
Supports ISO 14443A higher transfer speed communication at 212 kbit/s and
424 kbit/s
Supports contactless communication according to the
and 424 kbit/s
Integrated RF interface for NFCIP-1 up to 424 kbit/s
Possibility to communicate on the RF interface above 424 kbit/s using external analog
circuitry
Support of the S2C interface
64 byte send and receive FIFO-buffer
Programmable timer
CRC Co-processor
internal self test
2 interrupt sources
Integrated RF Level detector
Integrated RF interface for NFCIP-1 up to 424 kbit/s
Reader/writer mode supporting ISO14443A / MIFARE
schemes.
Card operation mode supporting ISO14443A / MIFARE
NFCIP-1 mode
Rev. 1.2 — 12 January 2006
®
Classic encryption in reader / writer mode
®
card or FeliCa™ card operation
®
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
FeliCa
, Felica™ and ISO14443B
®
and Felica™ schemes
™ scheme at 212 kbit/s
PN532/C1
NFC controller
10 of 25