hb28j128mm3 Renesas Electronics Corporation., hb28j128mm3 Datasheet - Page 76

• Manufacturer Part Number: hb28j128mm3
• Description: Multimediacard 32 Mbyte/64 Mbyte/128 Mbyte/256 Mbyte/512 Mbyte
• Manufacturer: Renesas Electronics Corporation.

HB28K032/L064/J128/J256/J512MM3, HB28K032/L064/J128/J256RM3
Power on / off
Each card has its own power on detection circuitry which puts the card into a defined state after the power-
on. No explicit reset signal is necessary. The cards can also be reset by a special software command:
GO_IDLE_STATE (CMD0). In case of emergency the host may also reset the cards by switching the
power supply off and on again.
A power on reset is generated on chip as long as V
parser of these Renesas MultiMediaCards works properly but the access to the memory core is not
guaranteed. So in the power up phase (or when these Renesas MultiMediaCards are inserted during power
up) the host has to wait after sending SEND_OP_COND (CMD1) for the identification delay before the
ALL_SEND_CID (CMD2) can be interpreted by the card:
Rev.0.02, Sep.15.2004, page 76 of 89
Power up
detection
V
V
CC
SS
ASYNC.RESET
CLK CMD
MultiMediaCard controller
command
parser
Power on Detection
CC
ENABLE
is below a certain limit. After this reset the command
DAT
core
controller
memory
core