ak4127 AKM Semiconductor, Inc., ak4127 Datasheet - Page 25

• Manufacturer Part Number: ak4127
• Description: 192khz / 24bit High Performance Asynchronous Src
• Manufacturer: AKM Semiconductor, Inc.

2. Jitter Tolerance
Figure 21shows the jitter tolerance to ILRCK and IBICK. The jitter quantity is defined by the jitter frequency and the jitter
amplitude shown in Figure 21. When the jitter amplitude is 0.01Uipp or less, the AK4127 operates normally regardless of
the jitter frequency.
Tracking to the Input Sampling Frequency
When the ILRCK is generated by an external PLL, it may take time to settle after changing the input sampling frequency
because the response of an external PLL to the frequency change is slow. The AK4127 operates normally up to 23%/sec
speed but outputs incorrect data at the speed of the frequency change over 23%/sec.
MS0593-E-01
(1) Normal operation
(2) There is a possibility that the distortion degrades. (It may degrade up to about −50dB.)
(3) There is a possibility that the output data is lost.
Note:
- When PLL2-0 = “L/*/*” (*: Don’t care), the jitter amplitude is for ILRCK and 1UI (Unit Interval) is one cycle of
- When PLL2-0 = “H/*/*” (*: Don’t care), the jitter amplitude is for IBICK and 1UI (Unit Interval) is one cycle of
ILRCK. When FSI = 48kHz, 1UI is 1/48kHz = 20.8μs.
IBICK. When FSI = 48kHz, 1UI is 1/(64 x 48kHz) = 326ns.
10.00
1.00
0.10
0.01
0.00
1
(2)
10
AK4127 Jitter Tolerance
Figure 21. Jitter Tolerance
Jitter Frequency [Hz]
- 25 -
(1)
100
(3)
1000
10000
[AK4127]
2007/07