ak4127 AKM Semiconductor, Inc., ak4127 Datasheet - Page 21

• Manufacturer Part Number: ak4127
• Description: 192khz / 24bit High Performance Asynchronous Src
• Manufacturer: AKM Semiconductor, Inc.

■
The AK4127 is reset automatically when the output clock is stopped. If the output clock is started again, normal data is
output within 100ms.
■
The change sequence of the clock supplied to AK4127 is shown in Figure 17
■
The UNLOCK pin outputs “L” when the internal PLL is locked. When the internal PLL is unlocked, the UNLOCK pin
outputs “H” and the SDTO = “0”. When the PDN pin = “L”, the UNLOCK pin outputs “H”.
MS0593-E-01
Internal Reset Function for Clock Change
Note 1. The data on SDTO may cause a clicking noise. To prevent this, set “0” to the SDTI from GD before the PDN
Note 2. SMUTE can also be used to remove the unknown data.
UNLOCK pin
Sequence of Changing Clocks
pin changes to “L”. It makes the data on SDTO remain as “0”.
External clocks
(Input port
PDN pin
(Internal state)
SDTO
SMUTE (Note2,
Att.Level
or Output port)
recommended)
-
0dB
∞
dB
Normal operation
Normal data
Clocks 1
Figure 17. Sequence of changing clocks
1024/fso
Power-down
Don’t care
Note1
- 21 -
PLL lock &
fs detection
< 100ms
Clocks 2
.
1024/fso
Normal operation
Normal data
[AK4127]
2007/07