tsl2580 ETC-unknow, tsl2580 Datasheet - Page 33

• Manufacturer Part Number: tsl2580
• Description: Light-to-digital Converter
• Manufacturer: ETC-unknow

Moisture Sensitivity
CS package
FN package
The LUMENOLOGY r Company
Optical characteristics of the device can be adversely affected during the soldering process by the release and
vaporization of moisture that has been previously absorbed into the package molding compound. To ensure the
package molding compound contains the smallest amount of absorbed moisture possible, each device is
dry-baked prior to being packed for shipping. Devices are packed in a sealed aluminized envelope with silica
gel to protect them from ambient moisture during shipping, handling, and storage before use.
The CS package has been assigned a moisture sensitivity level of MSL 2 and the devices should be stored under
the following conditions:
Rebaking will be required if the aluminized envelope has been open for more than 1 year. If rebaking is required,
it should be done at 90°C for 3 hours.
The FN package has been assigned a moisture sensitivity level of MSL 3 and the devices should be stored under
the following conditions:
Rebaking will be required if the devices have been stored unopened for more than 6 months or if the aluminized
envelope has been open for more than 168 hours. If rebaking is required, it should be done at 90°C for 4 hours.
Temperature Range
Relative Humidity
Floor Life
Temperature Range
Relative Humidity
Total Time
Opened Time
5°C to 50°C
60% maximum
1 year out of bag at ambient < 30°C / 60% RH
5°C to 50°C
60% maximum
6 months from the date code on the aluminized envelope — if unopened
168 hours or fewer
MANUFACTURING INFORMATION
r
www.taosinc.com
LIGHT-TO-DIGITAL CONVERTER
r
TSL2580, TSL2581
Copyright E 2010, TAOS Inc.
TAOS098 − MARCH 2010
33