sc16c852sviet NXP Semiconductors, sc16c852sviet Datasheet - Page 23

no-image

sc16c852sviet

Manufacturer Part Number
sc16c852sviet
Description
1.8 V Dual Uart, 20 Mbit/s Max. With 128-byte Fifos, Infrared Irda , And Xscale Vlio Bus Interface
Manufacturer
NXP Semiconductors
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SC16C852SVIET
Manufacturer:
NXP
Quantity:
385
Part Number:
SC16C852SVIET
Manufacturer:
NXP/恩智浦
Quantity:
20 000
Part Number:
sc16c852sviet,115
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Part Number:
sc16c852sviet,151
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Part Number:
sc16c852sviet,157
Manufacturer:
NXP Semiconductors
Quantity:
10 000
NXP Semiconductors
SC16C852SV_1
Product data sheet
7.3.1 FIFO mode
7.3 FIFO Control Register (FCR)
This register is used to enable the FIFOs, clear the FIFOs and set the receive FIFO trigger
levels.
Table 9.
[1]
[2]
Bit
7:6
5:4
3
2
1
0
For 128-byte FIFO mode, refer to
For 128-byte FIFO mode, refer to
Symbol
FCR[7:6]
FCR[5:4]
FCR[3]
FCR[2]
FCR[1]
FCR[0]
FIFO Control Register bits description
Dual UART with 128-byte FIFOs, IrDA, and XScale VLIO bus interface
Description
Receive trigger level in 32-byte FIFO mode.
These bits are used to set the trigger level for receive FIFO interrupt and flow
control. The SC16C852SV will issue a receive ready interrupt when the
number of characters in the receive FIFO reaches the selected trigger level.
Refer to
Transmit trigger level in 32-byte FIFO mode.
These bits are used to set the trigger level for the transmit FIFO interrupt and
flow control. The SC16C852SV will issue a transmit empty interrupt when the
number of characters in FIFO drops below the selected trigger level. Refer to
Table
reserved
XMIT FIFO reset.
RCVR FIFO reset.
FIFO enable.
Rev. 01 — 23 September 2008
logic 0 = no FIFO transmit reset (normal default condition)
logic 1 = clears the contents of the transmit FIFO and resets the FIFO
counter logic. This bit will return to a logic 0 after clearing the FIFO.
logic 0 = no FIFO receive reset (normal default condition)
logic 1 = clears the contents of the receive FIFO and resets the FIFO
counter logic. This bit will return to a logic 0 after clearing the FIFO.
logic 0 = disable the transmit and receive FIFO (normal default condition)
logic 1 = enable the transmit and receive FIFO
11.
Table
Section
Section
10.
7.16,
7.15,
Section
Section
7.17,
7.17,
Section
Section
[1]
[2]
7.18.
7.18.
SC16C852SV
© NXP B.V. 2008. All rights reserved.
23 of 48

Related parts for sc16c852sviet