ak4382a AKM Semiconductor, Inc., ak4382a Datasheet - Page 15

• Manufacturer Part Number: ak4382a
• Description: 112db 192khz 24-bit 2ch Ds Dac
• Manufacturer: AKM Semiconductor, Inc.

ASAHI KASEI
n Reset Function
When RSTN=0, DAC is powered down but the internal register values are not initialized. The analog outputs go to VCOM
voltage and DZF pin goes to “H”. Figure 7 shows the example of reset by RSTN bit.
Notes:
MS0071-E-02
(1) The analog output corresponding to digital input has the group delay (GD).
(2) Analog outputs go to VCOM voltage (VDD/2).
(3) Click noise occurs at the edges(“
(4) The external clocks (MCLK, BICK and LRCK) can be stopped in the reset mode (RSTN = “L”).
(5) DZF pins go to “H” when the RSTN bit becomes “0”, and go to “L” at 2/fs after RSTN bit becomes “1”.
(6) There is a delay, 3~4/fs from RSTN bit “0” to the internal RSTN bit “0”, and 2~3/fs from RSTN bit “1” to the internal
Internal
D/A In
D/A Out
Clock In
MCLK,LRCK,BICK
RSTN bit
Internal
RSTN bit
DZF
input.
RSTN “1”.
(Digital)
(Analog)
State
Normal Operation
(1)
Figure 7. Reset Sequence Example
”) of the internal timing of RSTN bit. This noise is output even if “0” data is
GD
(3)
Digital Block Power-down
- 15 -
3~4/fs (6)
“0” data
(4)
Don’t care
(2)
(3)
2~3/fs (6)
2/fs(5)
Normal Operation
GD
(1)
[AK4382A]
2002/12