mb95f118awpv2 Fujitsu Microelectronics, Inc., mb95f118awpv2 Datasheet - Page 6

• Manufacturer Part Number: mb95f118awpv2
• Description: 8-bit Proprietary Microcontrollers
• Manufacturer: Fujitsu Microelectronics, Inc.

6
MB95110A Series
• Notes on Using Evaluation Products
• Difference of Memory Spaces
• Current Consumption
• Package
• Operating voltage
• Difference between RST and MOD pins
DIFFERENCES AMONG PRODUCTS AND NOTES ON SELECTING PRODUCTS
The Evaluation product has not only the functions of the MB95110A corresponding products series but also
those of other products to support software development for multiple series and models of the F
The I/O addresses for peripheral resources not used by the MB95110A series are therefore access-barred.
Read/write access to these access-barred addresses may cause peripheral resources supposed to be unused
to operate, resulting in unexpected malfunctions of hardware or software.
Particularly, do not use word access to odd numbered byte address in the prohibited areas (If these access are
used, the address may be read or written unexpectedly).
Note that the values read from barred addresses are different between the Evaluation product and the Flash
memory or MASK ROM product. Therefore, the data must not be used for software processing.
The Evaluation product do not support the functions of some bits in single-byte registers. Read/write access to
these bits does not cause hardware malfunctions. The Evaluation, Flash memory, and MASK ROM products
are designed to behave completely the same way in terms of hardware and software.
If the amount of memory on the Evaluation product is different from that of the Flash memory or MASK ROM
product, carefully check the difference in the amount of memory from the model to be actually used when
developing software.
For details of memory space, refer to “ CPU CORE”.
The current consumption of Flash memory product is greater than for MASK ROM product.
For details of current consumption, refer to “ ELECTRICAL CHARACTERISTICS”.
For details of information on each package, refer to “ PACKAGE DIMENSIONS”.
The input type of RST and MOD pins is CMOS input on the Flash memory product.
The RST and MOD pins are hysteresis inputs on the MASK ROM product. A pull - down resistor is provided for
the MOD pin of the MASK ROM product.
The operating voltage are different among the Evaluation, Flash memory, and MASK ROM products.
For details of operating voltage, refer to “ ELECTRICAL CHARACTERISTICS”
2
MC-8FX family.