W83783S Information Storage Devices, Inc, W83783S Datasheet - Page 6

• Manufacturer Part Number: W83783S
• Description: H/w Monitor: 3 Temp.(thermal Diode), 6 Vol., 2 PWM Fan Control
• Manufacturer: Information Storage Devices, Inc

1. GENERAL DESCRIPTION
W83783S is an evolving version of
monitoring IC. The W83783S can be used to monitor several critical hardware parameters of the
system, including power supply voltages, fan speeds, and temperatures, which are very important for
a high-end computer system to work stable and properly.
interface.
An 8-bit analog-to-digital converter (ADC) was built inside W83783S. The W83783S can monitor 6
analog voltage inputs, 3 fan tachometer inputs, and 3 remote temperature. The remote temperature
sensing can be performed by thermistors, or 2N3904 NPN-type transistors, or directly from Intel
Deschutes CPU thermal diode output. Also the W83783S provides: 2 PWM (pulse width modulation)
outputs for the fan speed control; beep tone output for warning; SMI#, OVT#, GPO# signals for
system protection events.
Through the application software or BIOS, the users can read all the monitored parameters of system
from time to time. And a pop-up warning can be also activated when the monitored item was out of
the proper/preset range. The application software could be Winbond's Hardware Doctor
LDCM (LanDesk Client Management), or other management application software. Also the users can
set up the upper and lower limits (alarm thresholds) of these monitored parameters and to activate
one programmable and maskable interrupts. An optional beep tone could be used as warning signal
when the monitored parameters is out of the preset range.
Additionally, 5 VID inputs are provided to read the VID of CPU (i.e. Pentium
to provide the Vcore voltage correction automatically. Also W83783S uniquely provides an optional
feature: early stage (before BIOS was loaded) beep warning. This is to detect if the fatal elements
present --- Vcore or +3.3V voltage fail, and the system can not be boomed up.
WINBOND H/W MONITORING IC
W83782D --- Winbond's most popular hardware status
- 1 -
W83783S provides I2C
Publication Release Date: April 1999
TM
II) if applicable. This is
W83783S
TM
TM
Revision 0.55
, or Intel
serial bus
TM
TM