at27c516 ATMEL Corporation, at27c516 Datasheet - Page 9

• Manufacturer Part Number: at27c516
• Description: 512k 32k X 16 Otp Eprom
• Manufacturer: ATMEL Corporation

18. Rapid Programming Algorithm
0362E–EPROM–1/08
A 50 µs PGM pulse width is used to program. The address is set to the first location. V
raised to 6.5V and V
PGM pulse without verification. Then a verification/reprogramming loop is executed for each
address. In the event a word fails to pass verification, up to 10 successive 50 µs pulses are
applied with a verification after each pulse. If the word fails to verify after 10 pulses have been
applied, the part is considered failed. After the word verifies properly, the next address is
selected until all have been checked. V
are read again and compared with the original data to determine if the device passes or fails.
PP
is raised to 13.0V. Each address is first programmed with one 50 µs
PP
is then lowered to 5.0V and V
CC
AT27C516
to 5.0V. All words
CC
is
9