lan8700 Standard Microsystems Corp., lan8700 Datasheet - Page 77

• Manufacturer Part Number: lan8700
• Description: ?15kv Esd Protected Mii/rmii 10/100 Ethernet Transceiver With Hp Auto-mdix Support And Flexpwrtm Technology In A Small Footprint
• Manufacturer: Standard Microsystems Corp.

±15kV ESD Protected MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support and flexPWR
Datasheet
SMSC LAN8700/LAN8700i
REVISION LEVEL
(06-27-07)
(05-29-07)
(05-29-07)
(05-23-07)
(05-23-07)
(05-23-07)
(05-23-07)
(05-23-07)
(05-23-07)
(04-17-07)
(04-17-07)
(04-12-07)
(04-12-07)
(04-12-07)
(04-04-07)
(01-12-07)
& DATE
Rev. 1.3
Rev. 1.2
Rev. 1.2
Rev. 1.2
Rev. 1.2
Rev. 1.2
Rev. 1.2
Rev. 1.2
Rev. 1.2
Rev. 1.1
Rev. 1.1
Rev. 1.1
Rev. 1.1
Rev. 1.1
Rev. 1.0
Rev 1.0
Table 6.5
Table 5.48
Table 5.30
Section 5.4.9.2
Table 5.30
Table 3.5
Table 7.11
Table 3.1
Table 6.7
Table 7.4
Table 3.4
Table 5.40
Table 5.29
Table 5.23
Table 5.30, “Register 0 - Basic
Control,” on page 41
Section 4.6.3, "MII vs. RMII
Configuration," on page 26
Section 8.1, "Application Diagram,"
on page 70
Table 5.33, “Register 3 - PHY
Identifier 2,” on page 42
Section 4.9.1, "Disable the Internal
+1.8V Regulator," on page 30
SECTION/FIGURE/ENTRY
Table 10.1 Customer Revision History (continued)
DATASHEET
TM
77
Technology in a Small Footprint
Moved parameter T5.2 in
column to MIN column.
Added description when the MODE[2:0] bits are set
to 110.
Corrected Default value for bit 0.11 to the value of
0. This bit does not get set when the MODE[2:0]
bits are set to 110.
Added detail about MODE[2:0] pins having no
affect at soft reset.
Added note to reset description (bit 0.15).
AT nRST, added note that register bit values are
loaded from the Mode pins upon deassertion.
Added RX_DV to table.
Added note that RX_DV and RX_ER cannot be
high during reset.
Moved parameter T8.2 from MAX column to MIN
column.
Changed column headings to add clarity regarding
source of current. Added Note.
Removed RX_CLK/REGOFF because it made
Note 3.1
Added this table to describe the register.
Added Register 26
Changed description from Reserved to Symbol
Error Counter
Table modified: Default column for “Power Down”
and “Isolate”
Fixed a typo, GPO0/MII is on the 187,
COL/RMII/CRS_DV is on the 8700
Added support components to crystal in application
diagram circuit. also added a note to the bottom to
indicate that purpose of R5 added.
Corrected reg3 values
Changed paragraph to correctly reflect operation
VDDIO and VDDA latch 1.8V regulator. 1.8v strap
above VIH or below VIL.
false.
CORRECTION
Table 6.5
Revision 2.0 (07-15-08)
from MAX