adc12l032 National Semiconductor Corporation, adc12l032 Datasheet - Page 9

• Manufacturer Part Number: adc12l032
• Description: 3.3v Self-calibrating 12-bit Plus Sign Serial I/o A/d Converters With Mux And Sample/hold
• Manufacturer: National Semiconductor Corporation

AC Electrical Characteristics
(Continued)
Note 16: Channel leakage current is measured after the channel selection.
Note 17: Timing specifications are tested at the TTL logic levels, V
= 0.4V for a falling edge and V
= 2.4V for a rising edge. TRI-STATE output voltage is forced
IL
IH
to 1.4V.
Note 18: The ADC12L030 family’s self-calibration technique ensures linearity and offset errors as specified, but noise inherent in the self-calibration process will
result in a maximum repeatability uncertainty of 0.2 LSB.
Note 19: If SCLK and CCLK are driven from the same clock source, then t
is 6, 10, 18 or 34 clock periods minimum and maximum.
A
Note 20: The “12-Bit Conversion of Offset” and “12-Bit Conversion of Full-Scale” modes are intended to test the functionality of the device. Therefore, the output
data from these modes are not an indication of the accuracy of a conversion result.
01183007
FIGURE 1. Transfer Characteristic
01183008
FIGURE 2. Simplified Error Curve vs. Output Code without Auto-Calibration or Auto-Zero Cycles
9
www.national.com