a152-db-5 Teledyne Technologies Incorporated., a152-db-5 Datasheet - Page 4

no-image

a152-db-5

Manufacturer Part Number
a152-db-5
Description
Series Designation A152 Relay Type Attenuator Relay Series
Manufacturer
Teledyne Technologies Incorporated.
Datasheet
SERIES A152
TYPICAL RF INSERTION LOSS REPEATABILITY CHARACTERISTICS (Notes 1 and 3)
RF INSERTION LOSS REPEATABILITY NOTES
1. Test conditions: a. Fixture: Custom plug-in test fixture.
2. Data presented herein represents typical characteristics and is not intended for use as specification limits.
3. Insertion loss repeatability measured over frequency range from 3 MHz to 5 GHz.
A152 Page 4
-0.1
-0.2
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
-0.1
0.2
0.1
1
0
0
0.0
0.0
• Data represents 1 sample of A152-20-5
• Relay was cycled at 5 Hz and IL was measured at every 10K cycles
• Relay was tested on a fixture made by Microtest Inc.
• HP 8719D VNA was used for measurements
• Test was performed at room temperature.
• RF input power level 10dBm
• Data represents 1 sample of A152-20-5
• Relay was cycled at 5 Hz and IL was measured at every 10K cycles
• Relay was tested on a fixture made by Microtest Inc.
• HP 8719D VNA was used for measurements
• Test was performed at room temperature.
• RF input power level 10dBm
up to 1M cycles. Data presented is with respect to the first sweep.
0.3
up to 1M cycles. Data presented is with respect to the first sweep.
0.3
b. Relay header is in contact with, but not soldered to, ground plane.
c. Test performed at room ambient temperature.
d. Contact signal level: 10 dBm.
0.6
0.6
0.9
0.9
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
1.2
1.2
1.5
1.5
A152 Insertion Loss Repeatability
A152 Insertion Loss Repeatability
1.8
1.8
(Attenuated Path)
2.1
2.1
Frequency (GHz)
(Through Path)
Frequency (GHz)
2.4
2.4
2.7
2.7
3.0
3.0
3.3
3.3
3.6
3.6
3.9
3.9
© 2006 TELEDYNE RELAYS
4.2
4.2
4.5
4.5
A152\042006\Q1
4.8 5.0
4.8 5.0

Related parts for a152-db-5