MX29LV320MB Macronix International, MX29LV320MB Datasheet

no-image

MX29LV320MB

Manufacturer Part Number
MX29LV320MB
Description
32M-BIT [4M x 8/2M x 16] SINGLE VOLTAGE 3V ONLY FLASH MEMORY
Manufacturer
Macronix International
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MX29LV320MBTC-70R
Manufacturer:
MX
Quantity:
20 000
Part Number:
MX29LV320MBTI-90
Manufacturer:
VISHAY
Quantity:
1 528
FEATURES
GENERAL FEATURES
• Single Power Supply Operation
• 4,194,304 x 8 / 2,097,152 x 16 switchable
• Sector structure
• Sector Protection/Chip Unprotect
• Secured Silicon Sector
• Latch-up protected to 250mA from -1V to VCC + 1V
• Low VCC write inhibit is equal to or less than 1.5V
• Compatible with JEDEC standard
PERFORMANCE
• High Performance
• Low Power Consumption
GENERAL DESCRIPTION
The MX29LV320MT/B is a 32-mega bit Flash memory
organized as 4M bytes of 8 bits or 2M bytes of 16 bits.
MXIC's Flash memories offer the most cost-effective and
reliable read/write non-volatile random access memory.
The MX29LV320MT/B is packaged in 44-pin SOP, 48-
pin TSOP and 48-ball CSP. It is designed to be repro-
grammed and erased in system or in standard EPROM
programmers.
P/N:PM1129
- 2.7 to 3.6 volt for read, erase, and program opera-
tions
- 8KB (4KW) x 8 and 64KB(32KW) x 63
- Provides sector group protect function to prevent pro-
gram or erase operation in the protected sector group
- Provides chip unprotect function to allow code changes
- Provides temporary sector group unprotect function
for code changes in previously protected sector groups
- Provides a 128-word OTP area for permanent, se-
cure identification
- Can be programmed and locked at factory or by cus-
tomer
- Pin-out and software compatible to single power sup-
ply Flash
- Fast access time: 70R/90ns
- Page read time: 25ns
- Sector erase time: 0.5s (typ.)
- Effective write buffer word programming time: 22us
- 4 word/8 byte page read buffer
- 16 word/ 32 byte write buffer: reduces programming
time for multiple-word/byte updates
- Active read current: 18mA(typ.)
- Active write current: 50mA(typ.)
- Standby current: 20uA(typ.)
32M-BIT [4M x 8/2M x 16] SINGLE VOLTAGE 3V
1
MX29LV320MT/B
• Minimum 100,000 erase/program cycle
• 20-year data retention
SOFTWARE FEATURES
• Support Common Flash Interface (CFI)
• Program Suspend/Resume
• Erase Suspend/Erase Resume
• Status Reply
HARDWARE FEATURES
• Ready/Busy (RY/BY#) Output
• Hardware Reset (RESET#) Input
• WP#/ACC input
PACKAGE
• 44-pin SOP
• 48-pin TSOP
• 48-ball CSP
The standard MX29LV320MT/B offers access time as
fast as 70ns, allowing operation of high-speed micropro-
cessors without wait states. To eliminate bus conten-
tion, the MX29LV320MT/B has separate chip enable
(CE#) and output enable (OE#) controls.
MXIC's Flash memories augment EPROM functionality
with in-circuit electrical erasure and programming. The
- Flash device parameters stored on the device and
provide the host system to access
- Suspend program operation to read other sectors
- Suspends sector erase operation to read data from
or program data to another sector which is not being
erased
- Data# polling & Toggle bits provide detection of pro-
gram and erase operation completion
- Provides a hardware method of detecting program
and erase operation completion
- Provides a hardware method to reset the internal
state machine to read mode
- Write protect (WP#) function allows protection of two
outermost boot sectors, regardless of sector protect
status
- ACC (high voltage) accelerates programming time
for higher throughput during system
ONLY FLASH MEMORY
REV. 1.1, JUL. 14, 2005
www.DataSheet4U.com

Related parts for MX29LV320MB

Related keywords