NL160120AC27_22B NEC, NL160120AC27_22B Datasheet - Page 34

• Manufacturer Part Number: NL160120AC27_22B
• Description: Display Module
• Manufacturer: NEC

www.DataSheet.co.kr
⑥ The product must be installed using mounting holes without undue stress such as bends or twist (See
⑦ Do not press or rub on the sensitive product surface. When cleaning the product surface, use of the
⑧ Do not push nor pull the interface connectors while the product is working.
⑨ When handling the product, use of an original protection sheet on the product surface (polarizer) is
⑩ Usually liquid crystals don't leak through the breakage of glasses because of the surface tension of thin
① Do not operate or store in high temperature, high humidity, dewdrop atmosphere or corrosive gases.
② In order to prevent dew condensation occurring by temperature difference, the product packing box
③ Do not operate in high magnetic field. Circuit boards may be broken down by it.
④ This product is not designed as radiation hardened.
6.3.2 Environment
outline drawings). And do not add undue stress to any portion (such as bezel flat area). Bends or twist
described above and undue stress to any portion may cause display mura.
Recommended installing method: Ideal plane "A" is defined by one mounting hole (datum point) and
other mounting holes. The ideal plane "A" should be the same plane within ±0.3 mm.
cloth with ethanolic liquid such as screen cleaner for LCD is recommended.
recommended for protection of product surface. Adhesive type protection sheet may change color or
characteristics of the polarizer.
layer and the construction of LCD panel. But, if you contact with liquid crystal for the worst, please wash
it out with soap.
Keep the product in packing box with antistatic pouch in room temperature to avoid dusts and sunlight,
when storing the product.
should be opened after enough time being left under the environment of an unpacking room. Evaluate
the leaving time sufficiently because a situation of dew condensation occurring is changed by the
environmental temperature and humidity. (Recommended leaving time: 6 hours or more with packing
state)
Mounting hole (Datum point)
PRELIMINARY DATA SHEET DOD-PP-0619 (1st edition)
Product
Mounting hole
Mounting hole
Ideal plane "A"
NL160120AC27-22B
34
Datasheet pdf - http://www.DataSheet4U.net/