NL12810AC28_01F NEC, NL12810AC28_01F Datasheet - Page 33

• Manufacturer Part Number: NL12810AC28_01F
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

GENERAL CAUTIONS
completely.
(1) Caution when taking out the module
(2) Cautions for handling the module
(3) Cautions regarding atmosphere
(4) Cautions about the module characteristics
Because the following figures and statements are very important. Please be sure you understand their contents
a) Pick up the pouch only, when removing out the module from the carrier box.
a)ý As the electrostatic discharges may break the LCD module, handle the LCD module with care against
b)
c) As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for
d) Do not pull the interface connectors in or out while the LCD module is operating.
e) Put the module display side down on that horizontal plane.
f)
g) When the module is operating, do not lose CLK, HS or Vsync signal. If any one or more of these signals is
h)ý The torque to mounting screw should never exceed 0.451 N·m (4.6 kgf·cm).
i)ý
a) Dew drop atmosphere should be avoided.
b) Do not store and/or operate the LCD module in high-temperature and/or high-humidity atmosphere.
c) This module uses cold cathode fluorescent lamps. The lifetime of lamps is shortened if the module is
d) Do not operate the LCD module in a high magnetic field.
a)ý Do not apply a fixed pattern for a long time to the LCD module at product aging. It may cause image
b)ý This module has the retardation film which may cause the variation of the color hue in the different viewing
Do not touch an inverter, on which there is a caution label, while the LCD module is in operation, because of
high voltage.
CAUTIONS
cleaning.
Handle connectors and cables with care.
lost, the LCD panel would be damaged.
Storage in an anti-static pouch and in a room temperature atmosphere is recommended.
operated at low temperatures.
electrostatic discharges.
Don't push or rub the surface of LCD module please. If you do the scratches or the rubbing marks may be
left on the surface of the module.
sticking. Use the screen savers if the display pattern is fixed for a long time.
angles. The ununiformity may appear on the screen in the high-temperature operation.
CAUTION
This figure is a mark that you will get an electric shock when you make a mistake to operate.
This figure is a mark that you will get hurt when you make a mistake to operate.
As LCD panel and backlight element are made from fragile glass material, impulse and pressure
to the LCD module should be avoided.
This figure is a mark that you will get hurt and/or the module will have damages when you make
a mistake to operate.
Data Sheet EN0509EJ1V0DS00
NL128102AC28-01F
33