NL10276BC24_14 NEC, NL10276BC24_14 Datasheet - Page 11

• Manufacturer Part Number: NL10276BC24_14
• Description: Display Module
• Manufacturer: NEC

www.DataSheet.co.kr
4.4 POWER SUPPLY VOLTAGE SEQUENCE
Note1: In terms of voltage variation (voltage drop) while VCC rising edge is below 3.0V, a protection
Note2: Display signals (D0+/-, D1+/-, D2+/- and CLK+/-) and function signals (DPS) must be Low
Note3: The backlight should be turned on within the valid period of display and function signals, in
Display signals*
Function signals
* These signals should be measured at the terminal of 100Ω resistance.
VCC
Note1
Note2
circuit may work, and then this product may not work.
or High-impedance, exclude the VALID period (See above sequence diagram), in order to
avoid that internal circuits is damaged.
If some of display and function signals of this product are cut while this product is working,
even if the signal input to it once again, it might not work normally. If customer stops the
display and function signals, they should be cut VCC.
order to avoid unstable data display.
0V
0ms < t < 35ms
0V
3.0V
DATA SHEET DOD-PP-0048 (1st edition)
ON
10μs≤ Tr < 50ms
VALID period
OFF
0ms < t < 35ms
Toff ≥ 50ms
NL10276BC24-14
ON
0.3V
11
Datasheet pdf - http://www.DataSheet4U.net/