NL10276AC30-04W NEC, NL10276AC30-04W Datasheet - Page 25

• Manufacturer Part Number: NL10276AC30-04W
• Description: LCD Module
• Manufacturer: NEC

(2) Environment
(3) Specification for products
(4) Other
General characteristics for the LCD
} Do not press or rub on the sensitive display surface. If customer clean on the panel surface, NEC
~ Do not push-pull the interface connectors while the product is working, because wrong power sequence
x Dewdrop atmosphere must be avoided.
y Do not operate or store in high temperature or high humidity atmosphere. Keep the product in
z Do not operate in high magnetic field. Circuit boards may be broken down by it.
{ Use an original protection sheet on the product surface (polarizer). Adhesive type protection sheet
x Do not display the fixed pattern for a long time because it may cause image sticking. Use a screen
y The display color may be changed by viewing angle because of the use of condenser sheet in the
z The luminance may be changed by voltage variation (voltage drop), even if power source applies
{ Optical characteristics may be changed by input signal timings.
x All GND, GNDB, VCC and VDDB terminals should be used without a non-connected line.
y Do not disassemble a product or adjust volume without permission of NEC Corporation.
z See 'REPLACEMENT MANUAL FOR BACKLIGHT', if customer would like to replace backlight
{ Pay attention not to insert waste materials inside of products, if customer uses screwnails.
| Pack the product with original shipping package, because of avoidance of some damages during
The following items are neither defects nor failures.
∗ ∗ ∗ ∗ Response time, luminance and color may be changed by ambient temperature.
∗ ∗ ∗ ∗ The LCD may be seemed luminance non-uniformity, flicker, vertical seam or small spot
∗ ∗ ∗ ∗ Optical characteristics (e.g. luminance, display uniformity, etc.) gradually is going to
by display patterns.
change depending on operating time, and especially low temperature, because the LCD has
cold cathode fluorescent lamps.
Corporation recommends using the cloth with ethanolic liquid.
antistatic pouch in room temperature, because of avoidance for dusts and sunlight, if customer stores
the product.
should be avoided, because it may change color or properties of the polarizer.
saver, if the fixed pattern is displayed on the screen.
backlight unit.
recommended voltage to backlight inverter.
lamps.
may break down the product.
transportation, when customer returns it to NEC Corporation for repair and so on.
DOD-M-0514
NEC Corporation
www.DataSheet4U.net
25/28