NL10276AC30-01 NEC, NL10276AC30-01 Datasheet - Page 26

• Manufacturer Part Number: NL10276AC30-01
• Description: 38 cm 15 inches / 1024 x 768 pixels / Full-color / Multi-scan Function / Built-in backlight with inverter Ultra wide viewing angle
• Manufacturer: NEC

www.DataSheet4U.com
GENERAL CAUTIONS
(1) Caution when taking out the module
(2) Cautions for handling the module
(3) Cautions for the atmosphere
(4) Caution for the module characteristics
26
Next figures and sentence are very important. Please understand these contents as follows.
b)
c) As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for
d) Do not pull the interface connectors in or out while the LCD module is operating.
e) Put the module display side down on a flat horizontal plane.
f)
g) When the module is operating, do not lose CLK, HS, or Vsync signal. If any one of these signals is lost, the
h) The torque to mounting screw should never exceed 0.392 N·m (4 kgf·cm).
i)
a) Dew drop atmosphere should be avoided.
b) Do not store and/or operate the LCD module in a high temperature and/or high humidity atmosphere.
c) This module uses cold cathode fluorescent lamps. Therefore, the life of lamps becomes short if the module
d) Do not operate the LCD module in a high magnetic field.
a) Do not apply the fixed pattern for a long time to the LCD module. It may cause image sticking. Please use
b) This module has the retardation film which may cause the variation of the color hue in the different viewing
c) The light vertical stripe may be observed depending on the display pattern. This is not defects or
a) Pick the pouch only, in taking out module from a carrier box.
a) As the electrostatic discharges may break the LCD module, handle the LCD module with care against
Do not touch an inverter, on which is stuck a caution label, while the LCD module is under the operation, because
of dangerous high voltage.
CAUTION
cleaning.
Handle connectors and cables with care.
LCD panel would be damaged.
Don’t push or rub the surface of LCD module please.
If you do, the scratches or the marks like rubbing may left on the surface of the module.
Storage in an anti-static pouch and under the room temperature atmosphere is recommended.
is operated under the low temperature environment.
the screen savers if the display pattern is fixed for a long time.
angles. The ununiformity may appear on the screen under the high temperature operation.
malfunctions.
electrostatic discharges.
CAUTION
This figure is a mark that you will get an electric shock when you make a mistake to operate.
This figure is a mark that you will get hurt when you make a mistake to operate
As the LCD panel and backlight element are made from fragile glass material, impulse and
pressure to the LCD module should be avoided.
This figure is a mark that you will get hurt and/or the module will have damages when you make
a mistake to operate.
Data Sheet EN0417EJ1V0DS00
NL10276AC30-01A