NL6448BC33-70F NEC, NL6448BC33-70F Datasheet - Page 26

• Manufacturer Part Number: NL6448BC33-70F
• Description: Display Module
• Manufacturer: NEC

www.DataSheet.co.kr
7. PRECAUTIONS
7.1 MEANING OF CAUTION SIGNS
7.2 CAUTIONS
7.3 ATTENTIONS
7.3.1 Handling of the product
"7.3 ATTENTIONS"!
① Take hold of both ends without touching the circuit board when the product (LCD module) is
② When the product is put on the table temporarily, display surface must be placed downward.
③ When handling the product, take the measures of electrostatic discharge with such as earth band,
④ The torque for product mounting screws must never exceed 0.294N⋅m. Higher torque might result
⑤ The product must be installed using mounting holes without undue stress such as bends or twist
⑥ Do not press or rub on the sensitive product surface. When cleaning the product surface, wipe it
⑦ Do not push or pull the interface connectors while the product is working.
⑧ When handling the product, use of an original protection sheet on the product surface (polarizer) is
⑨ Usually liquid crystals don't leak through the breakage of glasses because of the surface tension of
The following caution signs have very important meaning. Be sure to read "7.2 CAUTIONS" and
∗ Do not shock and press the LCD panel and the backlight! There is a danger of
picked up from inner packing box to avoid broken down or misadjustment, because of stress to
mounting parts on the circuit board.
ionic shower and so on, because the product may be damaged by electrostatic.
in distortion of the bezel.
(See outline drawings). And do not add undue stress to any portion (such as bezel flat area). Bends
or twist described above and undue stress to any portion may cause display mura.
recommended for protection of product surface. Adhesive type protection sheet may change color
or characteristics of the polarizer.
thin layer and the construction of LCD panel. But, if you contact with liquid crystal by any chance,
please wash it away with soap and water.
with a soft dry cloth.
!
breaking, because they are made of glass. (Shock: Equal to or no greater than 539m/s
and equal to or no greater than 11ms, Pressure: Equal to or no greater than 19.6 N
(φ16mm jig))
damage if the customer practices wrong operations.
wrong operations.
This sign has the meaning that a customer will be injured or the product will sustain
This sign has the meaning that a customer will be injured if the customer practices
!
DATA SHEET DOD-PP-0950 (1st edition)
NL6448BC33-70F
2
26
Datasheet pdf - http://www.DataSheet4U.net/