NL6448BC33-31D NEC, NL6448BC33-31D Datasheet - Page 19

no-image

NL6448BC33-31D

Manufacturer Part Number
NL6448BC33-31D
Description
TFT Color LCD Module
Manufacturer
NEC
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
NL6448BC33-31D
Manufacturer:
NEC
Quantity:
1 000
www.DataSheet4U.com
GENERAL CAUTIONS
(1) Caution when taking out the module
(2) Cautions for handling the module
(3) Cautions for the atmosphere
(4) Caution for the module characteristics
Next figures and sentence are very important. Please understand these contents as follows.
a) Pick the pouch only, in taking out module from a carrier box.
a) As the electrostatic discharges may break the LCD module, handle the LCD module with care against
b)
c) As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for
d) Do not pull the interface connectors in or out while the LCD module is operating.
e) Put the module display side down on a horizontal plane.
f)
g) When the module is operating, do not lose CLK, Hsync or Vsync signal. If any one of these signals is lost,
h) The torque to mounting screw should never exceed 0.294 N·m (3 kgf·cm).
a) Dew drop atmosphere should be avoided.
b) Do not store and/or operate the LCD module in a high temperature and/or high humidity atmosphere.
c) This module uses cold cathod fluorescent lamp.
d) Do not operate the LCD module in a high magnetic field.
a) Do not apply fixed pattern data signal for a long time to the LCD module. It may cause image sticking.
Do not touch an inverter, on which is stuck a caution label, while the LCD module is under the operation, because
of dangerous high voltage.
CAUTION
electrostatic discharges.
cleaning.
Handle connectors and cables with care.
the LCD panel would be damaged.
Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere
is recommended.
conspicuously at low temperature.
Please use screen savers if the display pattern is fixed more than one hour.
CAUTION
This figure is a mark that you will get an electric shock when you make a mistake to operate.
This figure is a mark that you will get hurt when you make a mistake to operate
As the LCD panel and backlight element are made from fragile glass material, impulse and
pressure to the LCD module should be avoided.
This figure is a mark that you will get hurt and/or the module will have damages when you make
a mistake to operate.
Therefore, the life time of lamp becomes short
NL6448BC33-31D
19

Related parts for NL6448BC33-31D